‹ › ×

Universal Recorder EDX-200A-1

SKU: เครื่องบันทึก

Incorporated real-time digital filter.8th digital filter enables acquisition of clear waveform.High-speed/low-speed dual samplingMeasurement of high-speed and low-speed phenomena while reducing data quantities is possible.

Availability:

1 in stock

Contact for a quote.

Request for Quotation Download Datasheet

ช่องทางการสั่งซื้ออื่น ๆ

ติดต่อทาง Line @santatech

ติดต่อทางอีเมล์ santatech@gmail.com

ติดต่อทางโทรศัพท์ 02-1013454

Description

Specifications

Models	EDX-200A-1 (With DCS-100A) EDX-200A-1-1 (With DCS-100A and DCS-101A)
Measuring Targets	Strain (Gage, transducer) Voltage Thermocouples Pulse (F/V) Piezoelectric acceleration (Built-in amplifier) CAN signals GPS
Conditioner Cards for Analog Inputs	The conditioner cards for EDX series [Note] The EDX-200A-4T can use only the CVM-41A,CDV-40B, CDV-40B-F and CAN-41A which performed temperature extension processing. [Note] The EDX-200A limits the number of CFV-40A. The number of CFV-40A is up to 1.
Conditioner Cards for CAN Data Inputs	CAN card (2 ports, max. 256 channels): CAN-41A [Note] Can install one CAN-41A to the final slot.
Voice Memo Input	1 channel (Input voice memo data is recorded together with the measurement data.) Use remote control unit RCU-42A. (Optional accessory) Use the Data Analysis Software DAS-200A (optional accessory) to play back recorded voice memos.

Sampling

Sampling Method	Simultaneously all channels
Sampling Mode	Normal: Records all channels' data at the same sampling clock. Dual: Enables high-speed sampling or low-speed sampling to every CH for recording.

Sampling Frequencies

Normal-sampling Mode	1-2-5 series 1 Hz to 100 kHz 1 Hz to 2 kHz When using CAN-41A 2ⁿ series 2 to 65536 Hz 2 to 2048 Hz When using CAN-41A
Dual-sampling Mode	High-speed sampling [Sf] 1-2-5 series 1 Hz to 100 kHz 1 Hz to 2 kHz when using CAN-41A 2ⁿ series 2 to 65536 Hz 2 to 2048 Hz when using CAN-41A Low-speed sampling [Ss] 1-2-5 series The division frequencies from high-speed sampling, and Ss ≤ Sf/4 2ⁿ series The division frequencies from high-speed sampling, and Ss ≤ Sf/4

Channels

Normal-sampling Mode	Max. 32 channels, 320 k/I (I is the integer part of the set sampling frequency.)
Dual-sampling Mode	Max. 64 channels, 320 k/I (I is the integer part of the set sampling frequency.). “High-speed and low-speed” setting counts as 2 channels.
When Using CAN-41A	Channels of CAN data

The Number of Sampling Frequency

Normal Mode	“320000/ The number of channels” or less
Dual Mode	High-speed sampling frequency: “320000/ The number of channels” or less. *About high-speed and low-speed setting channels, the number of channels per channel is 2.

Digital Filter	Butterworth filter (IIR) Type of filter: LPF, HPF Order of a filter: 1 to 8 Amplitude ratio at cutoff point: -3 dB Attenuation: -6 x N dB/oct. (N is order of the filter) Simultaneously use with built-in LPF possible. Application on CAN data not possible.
Data Recording Unit	CF card Capacity: 128 MB to 16 GB (our recommended only) Maximum data file size (available data file size to be recorded) When the number of repeat times is 1: 4 GB/data file When the number of repeat times is 2: 1 GB/data file (1GB = 1000000000 bytes)
Control Switch	UP/DOWN : Changes the display on the small indicator. REC/PAUSE : Starts and pauses data recording. STOP : Stops data recording. BAL. : Execute the balance. LOAD : Loads and sets conditions. OPT. : Conducts the pre-set arbitrary function. ID : Sets the EDX-200A identification No. POWER : POWER switch USB/LAN : Selects a communication interface (USB /LAN) [NOTE] The EDX-200A-1 does not have the UP/DOWN switch and ID switch.
Indicator	Channel status display LED: 8 Unit status display LED: 4
Operating Switch	REC/PAUSE: Start/pause data recording. STOP: Stop data recording. BAL.: Implement balance (Balance adjustment) LOAD: Read and configure conditions from CF card OPT.: Execute arbitrary configured functions POWER: Power switch USB/LAN: Communications I/F, switchable
External Control Connector	CONT. IN (Remote control, for synchronous operation)
Communication interfaces	USB(USB2.0 High Speed) 1 port Connector: Series B receptacle connector LAN(10/100BASE-T) 2 ports LAN IN connector: For PC communication LAN OUT connector For synchronous operation Connector: RJ45 modular jack connector [NOTE] The EDX-200A-1 does not have the LAN OUT connector for the synchronous operation.
How To Setting Conditions	Online setting: Set measuring conditions on the PC via the LAN or USB interface. Offline setting: Set measuring conditions by allowing the EDX-200A to read measuring conditions in the CF card. (Use DCS-100A to set measuring conditions.)
Saving Conditions	Store the conditioner cards' setting conditions and measuring conditions in nonvolatile memory in the EDX-200A. When turning ON the EDX-200A, the user can immediately start data recording with previously set conditions.

Measuring Modes

	Manual measurement Trigger measurement Interval measurement
Manual Measurement	Data recording is manually started or stopped when data is recorded to a preset number of measured data. Manual mode allows recording of voice memo during data recording.
Trigger Measurement	Data recording is automatically started when the preset trigger condition is satisfied. *No CAN data of CAN-41A is used as the trigger condition.
Interval Measurement	Automatically recording functions based upon previously-set interval conditions Combination with measured mode when in dual sampling (High-speed sampling channel - Low-speed sampling channel) Manual--------------------------------Manual Trigger--------------------------------Manual, interval Interval ------------------------------ Interval

Starting and Stopping Data Recording	Data recording starts/stops by using the PC,panel switches or the RCU-42A
Balance Operation	Adjust the balance of the strain input channel and conduct the zero suppress of the voltage input CH of the CVM-41A by using the PC, control switches (on the front panel) or the RCU-42A
Recording Data Format	Kyowa standard file format KS2 Analysis using optional Data Analysis Software DAS-200A is possible.
Data Collection	Online using PC, or offline direct reading from CF card to PC
TEDS Function	TEDS function is available only when online control from the PC. TEDS compatible conditioner cards: CDV-40B (-F),DPM-42B (-F), DPM-42B-I (-F), CCA-40A (-F),CDV-44AS, CDA-44AS, CDA-45AS, CVM-41A
Power Supply	10 to 33 VDC Connector type: RM12BRD-4PH (Hirose) Use DC power supply or AC adapter (Optional accessory)
Current Consumption	Approx. 1.0 A (12 VDC with 1 CDV-40B card installed)
Operating Temperature	0 to 50ºC
Operating Humidity	20 to 90% (Non-condensing)
Storage Temperature	−20 to 60ºC
Vibration Resistant	49.0 m/s² (5 G), 5 to 55 Hz 1 cycle 1 min., each axis 15 cycles (Non-operating) 29.4 m/s² (3 G), 5 to 55 Hz 1 cycle 1 min., each axis 15cycles (Operating)
Impact Resistant	294.2 m/s² (30 G) /11 ms
Dimensions	148 W x 53 H x 257 D mm (Excluding protrusions)
Weight	Approx. 0.9 kg (Approx.1.1 kg with 1 CDV-40B cards installed.)
Compliance	Directive 2014/30/EU (EMC) Directive 2011/65/EU, (EU)2015/863 (10 restricted substances) (RoHS)

Standard Accessories	DC power cable P-76 USB cable N-38 Ground wire P-72 CF card (1 GB) inserted in the slot EDX accessory bag Dynamic data acquisition software DCS-100A (DVD) *DCS-100A is optional for models with suffix "-0". Instruction manual (In English & Japanese, in the above DVD)
Optional Accessories	AC adapter UIA345-12 (For U.S.A.: UNI345-1238) Fixing adapter EDX dummy panel EDX1P-DUMMY Remote control unit RCU-42A Monitor unit EMON-20A

SANTA TECHNOLOGY CO.,LTD. (Head Office)
35/218 Moo. 2, Leabkhlongsam Rd., Khlongsam, Khlongluang, Pathumthani 12120
Call 02-101-3454 ,089-006-2766
Fax 02-101-3453
Mail. santatech@gmail.com
Line : @santatech
Web : https://santatechnology.com/

Universal Recorder EDX-200A-1