Medium Speed Network Terminal Box NTB-500C

Description

The NTB-500C is a compact & lightweight data logger, which can synchronous measurement of all channels at a max. 1k Hz.
8 units synchronously for up to 64 channels connecting by one wire for decentralized arrangement is possible.

Specifications

Models	NTB-500C, control software DCS-100A (Standard accessory) NTB-500C-0, control software DCS-100A (Optional accessory)
Mountable Measuring Units	[Model: NTB-50C] Name: Strain Unit Terminal block type: One-touch type [Model: NTB-51C] Name: Voltage/Thermocouple Unit Terminal block type: Soldering, screwing type
Measuring Targets and Measuring Units	[Strain Unit NTB-50C] Strain gages, strain-gage transducers Quarter bridge 120 Ω 2-wire system Quarter bridge 120 Ω 3-wire system Half bridge 120 to 1000 Ω Active-active system Full bridge 120 to 1000 Ω [Voltage/Thermocouple Unit NTB-51C] Voltage ±10.0000 V Voltage ±50.000 V Temperature Thermocouples K(CA) Temperature Thermocouples T(CC) *You are not able to combine with the NTB-50A, NTB-50B, NTB-51A.
Channels	Max. 8/unit Mixed combination of up to 2 measuring units (4 channels/unit) possible
Synchronous Operation	Max. 8 units, 64 channels The NTB-500C can connect with the NTB-500A.
Automated Measurement Functions	Able to preset the measuring conditions by using the Measurement Condition Setting Software. Able to output the CAN data after turning ON the power. There is no data synchronization between measuring instruments.
Sampling Frequencies	1, 2, 5, 10, 20, 50, 100, 200, 500, 1000 Hz Synchronous sampling of all channels. Sampling frequencies (Hz): 1 k Cable length = 20 m: 8 Cable length = 80 m: 4 Cable length = 100 m: ー Cable length = 400 m: ー Sampling frequencies (Hz): 500 Cable length = 20 m: 16 Cable length = 80 m: 8 Cable length = 100 m: 4 Cable length = 400 m: ー Sampling frequencies (Hz): 200 Cable length = 20 m: 40 Cable length = 80 m: 20 Cable length = 100 m: 8 Cable length = 400 m: 4 Sampling frequencies (Hz): 100 Cable length = 20 m: 64 Cable length = 80 m: 40 Cable length = 100 m: 20 Cable length = 400 m: 8 Sampling frequencies (Hz): 50 Cable length = 20 m: 64 Cable length = 80 m: 64 Cable length = 100 m: 40 Cable length = 400 m: 20 Sampling frequencies (Hz): 20 to 1 Cable length = 20 m: 64 Cable length = 80 m: 64 Cable length = 100 m: 64 Cable length = 400 m: 64 *Make sure the firmware version is 01.05 or later for using the communication cable length 400 m.
Cable Length	Total extended cable length, max. 400 m
TEDS	When NTB-50C installed Reads information from TEDS-installed sensors. Channel name writing (If the manufacturer's ID is Kyowa)
Interfaces	Bosch 2.0B active support (ISO-11898 specifications-compliant high-speed CAN)
Data Save	Measurement data is saved on a PC. (No internal storage)
Operating Temperature	-10 to 50 ºC
Operating Humidity	20 to 85% (Non-condensing)
Power Supply	11 to 16 VDC
Current Consumption (When using 12 VDC)	[With 2 NTB-50C installed] Stand-by: 200 mA or less Measuring: 230 mA or less [With 2 NTB-51C installed] Stand-by: 250 mA or less Measuring: 300 mA or less
Dimensions	175 W × 28.7 H × 106.4 D mm (Excluding protrusions)
Weight	Approx. 490 g
Compliance	Directive 2014/30/EU (EMC) Directive 2011/65/EU, (EU)2015/863 (10 restricted substances) (RoHS)

Standard Accessories

DC power cable P-76 Ground wire P-72 NTB-500A/C dummy panel (NTB500-DUMMY)* * NTB-500A/C dummy panel is mounted on a vacant slot before shipment. Wire connection seal Rubber feet × 4 Driver holder (With a mini screwdriver) × 1 set Simplified software Driver for a USB/CAN converter DVD (Dynamic Data Acquisition Software DCS-100A) ** ** For NTB-500C, standard accessory. For NTB-500C-0, optional accessory. Instruction manual

Optional Accessories

NTB-500A/C sync communications cable N-119 (1 m) Note: Please contact us if other than the cable lengths above are required. NTB-500A/C sync Y-cable N-120 (One side 0.1 m) Connection cable N-38 (1 m) AC adapter SA-10A-EDS (100 to 240 VAC) (For U.S.A.: UNI318-1215-EDS) Strain Unit NTB-50C Voltage/Thermocouple Unit NTB-51C Docking board for 2 boxes of NTB-500A/C CN-10A: For connecting 2 boxes of NTB-500A/C Docking board for 4 boxes of NTB-500A/C CN-11A: For connecting 4 boxes of NTB-500A/C NTB-500A/C dummy panel NTB500-DUMMY DIN rail mounting plate DIN rail (35 mm) Terminal resistor CANTERM120 USB/CAN converter LEAFLIGHT HS V2 Data analysis software DAS-200A NTB power supply box NTB-20A

NTB-50C

Specifications

Terminal Block	One-touch type
Channels	4
Measuring Targets	Strain gages Strain-gage transducers
Compatible Bridge Resistance	Quarter-bridge 120 Ω (2-wire, 3-wire) Half-bridge, Full-bridge 120 to 1000 Ω
Gage Factor	2.00 fixed
Bridge Excitation	2 VDC ±1%
Check Functions	Cable disconnection check
TEDS	Reads information from TEDS-installed sensors. Channel name writing (If the manufacturer's ID is Kyowa)
Measuring Range, Resolution, Range Accuracy	Measuring range: 30 k ×10-6 strain Resolution: 0.1 ×10-6 strain Range accuracy: ±0.1%FS Measuring range: 300 k ×10-6 strain Resolution: 1 ×10-6 strain Range accuracy: ±0.1%FS
Response Frequencies	DC to 100 Hz (Deviation +1 dB, -3 dB)
Dimensions	152.2 W × 6.1 H × 45 D mm (Excluding protrusions)
Weight	Approx. 85 g
Compliance	Directive 2014/30/EU (EMC) Directive 2011/65/EU, (EU)2015/863 (10 restricted substances) (RoHS)

NTB-51C

Specifications

Terminal Block	Screw-soldering type
Channels	4
Measuring Targets	Voltage Thermocouples (K, T)
Check Functions	Burnout check
TEDS	N/A
At voltage measurement	[Measuring range: 10 V] Resolution: 100 μV Range accuracy: ±0.1%FS Input resistance: Approx. 1 MΩ [Measuring range: 50 Ｖ] Resolution: 1 mV Accuracy: ±0.1%FS Input resistance: Approx. 1 MΩ
At thermocouple measurement	[Type: K] Measuring range: -200.0 to 1230.0°C Accuracy External standard junction: ±(0.5% of reading＋1.0)°C Internal standard junction range, temp. (25 ±10)°C: ±(0.5% of reading +2.0)°C (At input terminal temp. balance) Resolution: 0.1°C [Type: T] Measuring range: -200.0 to 400.0 °C Accuracy External standard junction: ±(0.5% of reading＋1.0)°C Internal standard junction range, temp. (25 ±10)°C: ±(0.5% of reading +2.0)°C (At input terminal temp. balance) Resolution: 0.1°C Notes: * Accuracy doesn't include the accuracy of the thermocouple. * Switching between internal and external standard junction compensator is possible. * Thermocouple resistance 1 kΩ or less
Response Frequencies	At voltage measurement: DC to 100 Hz (Deviation +1 dB, -3 dB) At thermocouple measurement: DC to 10 Hz (Deviation +0.5 dB, -1 dB)
Isolation	Between channels: 50 MΩ or more (500 VDC)
Dimensions	152.2 W × 6.1 H × 45 D mm (Excluding protrusions)
Weight	Approx. 95 g
Compliance	Directive 2014/30/EU (EMC) Directive 2011/65/EU, (EU)2015/863 (10 restricted substances) (RoHS)

SANTA TECHNOLOGY CO.,LTD. (Head Office)
35/218 Moo. 2, Leabkhlongsam Rd., Khlongsam, Khlongluang, Pathumthani 12120
Call 02-101-3454 ,089-006-2766
Fax 02-101-3453
Mail. santatech@gmail.com
Line : @santatech
Web : https://santatechnology.com/