ติดตามเราได้ที่ : facebook line
Handy Data Logger SME-30A/31A/100A/101A

Handy Data Logger SME-30A/31A/100A/101A

Kyowa
SKU: SME-30A/31A/1
Built-in bridge circuit for direct connection of a strain gage Wide measuring range: ±300 k ×10-6 strain Driven by AA batteries
Availability:

1 in stock

Contact for a quote.

Request for Quotation

Description

The SME Series are handy data loggers for connecting strain gages, strain-gage transducers, and civil engineering transducers with thermal sensor.

Handy Data Logger SME-30A

Specifications

Channels 1
Sampling Period Approx. 0.5 s: 0 to ±30 k ×10-6 strain

Approx. 1 s: ±30 k ×10-6 strain or more

Approx. 1 s: Civil engineering transducers with a thermal sensor
Measuring Functions RELATIVE measurement (Relative value measurement):
Each value is obtained by subtracting the ZERO value.

＊ZERO value is equivalent to the initial unbalance value.
Capable of obtaining the ZERO value at arbitrary timing
Arithmetic Operations Calculation using coefficients
Measuring Targets Strain gages
Strain-gage transducers
Civil engineering transducers with a thermal sensor

Bridge systems------------Compatible gage resistance
Quarter bridge------------120, 240, and 350 Ω
Half/full bridge-------------120 to 1000 Ω
Bridge Excitation Constant-voltage bridge excitation: Approx. 2 VDC
Constant-current bridge excitation: Approx. 5.6 mA
(Bridge resistance 350 Ω)
Measuring Range [At strain measurement]
0 to ±300 k ×10-6 strain (Constant-voltage bridge excitation)
0 to ±20 k ×10-6 strain (Constant-current bridge excitation)

[When measuring temperature with civil engineering transducers with a thermal sensor]
-30.0°C to 70.0°C
Resolution [At strain measurement]
0 to ±30 k ×10-6 strain: 1 ×10-6 strain
±30 k to ±300 k ×10-6 strain: 10 ×10-6 strain

[When measuring temperature with civil engineering transducers with a thermal sensor]
0.1°C
Accuracy (With Full Bridge NDIS4102 (7 pins) Connector) [At full bridge strain measurement]
0 to ±30 k ×10-6 strain: ± (0.05% of reading +2) ×10-6 strain
±30 k to ±300 k ×10-6 strain: ± (0.1% of reading +20) ×10-6 strain

[When measuring temperature with civil engineering transducers with a thermal sensor]
±0.5°C
Check Functions Insulation resistance measurement: 2 M to 100 MΩ
Resistance measurement: 0 to 20 kΩ
Interval Measurement 1 min to 99 h 59 min in 1 min steps
Starting time: year/month/day/hour/minute
Storage SD card (Option)
Applicable Cards 256 MB, 512 MB, 1 GB, 2 GB (FAT16)
(SDHC and SDXC not supported)
Display Monochrome LCD, 128 × 64
TEDS Reads information from TEDS-installed sensors.

Channel name writing
(Kyowa ID only in up to 10 characters)
Operating Temperature -10 to 50ºC
Operating Humidity 20 to 85% (Non-condensing)
Power Supply 2 AA alkaline batteries
Consecutive Operation Time Approx. 10 h
(With alkaline batteries)
*Nickel metal hydride batteries are also used.
Auto Power Off Power is automatically turned off if no key operation is detected for 5 minutes.

In interval measuring mode with an interval of 3 minutes or longer, power is automatically turned off during standby period and turned on again 1 minute before the next measurement is started.
(ON/OFF of Auto Power Off is settable.)
Dimensions 188 W × 41 H x 108.4 D mm (Excluding protrusions)
Weight Approx. 450 g (Excluding batteries)
Compliance Directive 2014/30/EU (EMC)
Directive 2011/65/EU, (EU)2015/863
(10 restricted substances) (RoHS)
Standard Accessories Input cable U-119
AA alkali battery × 2
Shoulder belt
Hand strap
Instruction manual (CD-R)
Optional Accessories Temperature measuring adapter for SME SMET-1A
Handy Data Logger, AC Adapter Available SME-31A

Specifications

Channels 1
Sampling Period Approx. 0.5 s: 0 to ±30 k ×10-6 strain

Approx. 1 s: ±30 k ×10-6 strain or more

Approx. 1 s: Civil engineering transducers with a thermal sensor
Measuring Functions RELATIVE measurement (Relative value measurement):
Each value is obtained by subtracting the ZERO value.

＊ZERO value is equivalent to the initial unbalance value.
Capable of obtaining the ZERO value at arbitrary timing
Arithmetic Operations Calculation using coefficients
Measuring Targets Strain gages
Strain-gage transducers
Civil engineering transducers with a thermal sensor

Bridge systems------------Compatible gage resistance
Quarter bridge------------120, 240, and 350 Ω
Half/full bridge-------------120 to 1000 Ω
Bridge Excitation Constant-voltage bridge excitation: Approx. 2 VDC
Constant-current bridge excitation: Approx. 5.6 mA
(Bridge resistance 350 Ω)
Measuring Range [At strain measurement]
0 to ±300 k ×10-6 strain (Constant-voltage bridge excitation)
0 to ±20 k ×10-6 strain (Constant-current bridge excitation)

[When measuring temperature with civil engineering transducers with a thermal sensor]
-30.0°C to 70.0°C
Resolution [At strain measurement]
0 to ±30 k ×10-6 strain: 1 ×10-6 strain
±30 k to ±300 k ×10-6 strain: 10 ×10-6 strain

[When measuring temperature with civil engineering transducers with a thermal sensor]
0.1°C
Accuracy (With Full Bridge NDIS4102 (7 pins) Connector) [At full bridge strain measurement]
0 to ±30 k ×10-6 strain: ± (0.05% of reading +2) ×10-6 strain
±30 k to ±300 k ×10-6 strain: ± (0.1% of reading +20) ×10-6 strain

[When measuring temperature with civil engineering transducers with a thermal sensor]
±0.5°C
Check Functions Insulation resistance measurement: 2 M to 100 MΩ
Resistance measurement: 0 to 20 kΩ
Interval Measurement 1 min to 99 h 59 min in 1 min steps
Starting time: year/month/day/hour/minute
Storage SD card (Option)
Applicable Cards 256 MB, 512 MB, 1 GB, 2 GB (FAT16)
(SDHC and SDXC not supported)
Display Monochrome LCD, 128 × 64
TEDS Reads information from TEDS-installed sensors.

Channel name writing
(Kyowa ID only in up to 10 characters)
Operating Temperature -10 to 50ºC
Operating Humidity 20 to 85% (Non-condensing)
Power Supply 2 AA alkaline batteries
Consecutive Operation Time Approx. 10 h(With alkaline batteries)
*Nickel metal hydride batteries are also used.
*An AC adapter (Optional, SW-0522E) is provided for SME-31A/101A.
Auto Power Off Power is automatically turned off if no key operation is detected for 5 minutes.

In interval measuring mode with an interval of 3 minutes or longer, power is automatically turned off during standby period and turned on again 1 minute before the next measurement is started.
(ON/OFF of Auto Power Off is settable.)
Dimensions 188 W × 41 H x 108.4 D mm (Excluding protrusions)
Weight Approx. 450 g (Excluding batteries)
Compliance Directive 2014/30/EU (EMC)
Directive 2011/65/EU, (EU)2015/863
(10 restricted substances) (RoHS)
Standard Accessories Input cable U-119
AA alkali battery × 2
Shoulder belt
Hand strap
Instruction manual (CD-R)
Optional Accessories AC adapter SW-0522E
Temperature measuring adapter for SME SMET-1A

Handy Data Logger with Network Capability SME-100A

Specifications

Channels 1 (when using single SME)
Max. 33 channels by connecting the NTB.
*Max. 33 channels (SME-100A/101A + 32 channels of the NTB)
Sampling Period Approx. 0.5 s: 0 to ±30 k ×10-6 strain

Approx. 1 s: ±30 k ×10-6 strain or more

Approx. 1 s: Civil engineering transducers with a thermal sensor
Measuring Functions RELATIVE measurement (Relative value measurement):
Each value is obtained by subtracting the ZERO value.

＊ZERO value is equivalent to the initial unbalance value.
Capable of obtaining the ZERO value at arbitrary timing
Arithmetic Operations Calculation using coefficients
Measuring Targets Strain gages
Strain-gage transducers
Civil engineering transducers with a thermal sensor

Bridge systems------------Compatible gage resistance
Quarter bridge------------120, 240, and 350 Ω
Half/full bridge-------------120 to 1000 Ω
Bridge Excitation Constant-voltage bridge excitation: Approx. 2 VDC
Constant-current bridge excitation: Approx. 5.6 mA
(Bridge resistance 350 Ω)
Measuring Range [At strain measurement]
0 to ±300 k ×10-6 strain (Constant-voltage bridge excitation)
0 to ±20 k ×10-6 strain (Constant-current bridge excitation)

[When measuring temperature with civil engineering transducers with a thermal sensor]
-30.0°C to 70.0°C
Resolution [At strain measurement]
0 to ±30 k ×10-6 strain: 1 ×10-6 strain
±30 k to ±300 k ×10-6 strain: 10 ×10-6 strain

[When measuring temperature with civil engineering transducers with a thermal sensor]
0.1°C
Accuracy (With Full Bridge NDIS4102 (7 pins) Connector) [At full bridge strain measurement]
0 to ±30 k ×10-6 strain: ± (0.05% of reading +2) ×10-6 strain
±30 k to ±300 k ×10-6 strain: ± (0.1% of reading +20) ×10-6 strain

[When measuring temperature with civil engineering transducers with a thermal sensor]
±0.5°C
Check Functions Insulation resistance measurement: 2 M to 100 MΩ
Resistance measurement: 0 to 20 kΩ
Interval Measurement 1 min to 99 h 59 min in 1 min steps
Starting time: year/month/day/hour/minute
Storage SD card (Option)
Applicable Cards 256 MB, 512 MB, 1 GB, 2 GB (FAT16)
(SDHC and SDXC not supported)
Display Monochrome LCD, 128 × 64
TEDS Reads information from TEDS-installed sensors.

Channel name writing
(Kyowa ID only in up to 10 characters)
Operating Temperature -10 to 50ºC
Operating Humidity 20 to 85% (Non-condensing)
Power Supply 2 AA alkaline batteries
Consecutive Operation Time Approx. 10 h(With alkaline batteries)
*Nickel metal hydride batteries are also used.
Auto Power Off Power is automatically turned off if no key operation is detected for 5 minutes.

In interval measuring mode with an interval of 3 minutes or longer, power is automatically turned off during standby period and turned on again 1 minute before the next measurement is started.
(ON/OFF of Auto Power Off is settable.)
Dimensions 188 W × 41 H x 108.4 D mm (Excluding protrusions)
Weight Approx. 450 g (Excluding batteries)
Compliance Directive 2014/30/EU (EMC)
Directive 2011/65/EU, (EU)2015/863
(10 restricted substances) (RoHS)
Standard Accessories Input cable U-119
AA alkaline battery × 2
Shoulder belt
Hand strap
Instruction manual (CD-R)
Communication cable N-102
Optional Accessories Temperature measuring adapter for SME SMET-1A


Handy Data Logger with Network Capability, AC Adapter AvailableSME-101A

Specifications

Channels 1 (when using single SME)
Max. 33 channels by connecting the NTB.
*Max. 33 channels (SME-100A/101A + 32 channels of the NTB)
Sampling Period Approx. 0.5 s: 0 to ±30 k ×10-6 strain

Approx. 1 s: ±30 k ×10-6 strain or more

Approx. 1 s: Civil engineering transducers with a thermal sensor
Measuring Functions RELATIVE measurement (Relative value measurement):
Each value is obtained by subtracting the ZERO value.

＊ZERO value is equivalent to the initial unbalance value.
Capable of obtaining the ZERO value at arbitrary timing
Arithmetic Operations Calculation using coefficients
Measuring Targets Strain gages
Strain-gage transducers
Civil engineering transducers with a thermal sensor

Bridge systems------------Compatible gage resistance
Quarter bridge------------120, 240, and 350 Ω
Half/full bridge-------------120 to 1000 Ω
Bridge Excitation Constant-voltage bridge excitation: Approx. 2 VDC
Constant-current bridge excitation: Approx. 5.6 mA
(Bridge resistance 350 Ω)
Measuring Range [At strain measurement]
0 to ±300 k ×10-6 strain (Constant-voltage bridge excitation)
0 to ±20 k ×10-6 strain (Constant-current bridge excitation)

[When measuring temperature with civil engineering transducers with a thermal sensor]
-30.0°C to 70.0°C
Resolution [At strain measurement]
0 to ±30 k ×10-6 strain: 1 ×10-6 strain
±30 k to ±300 k ×10-6 strain: 10 ×10-6 strain

[When measuring temperature with civil engineering transducers with a thermal sensor]
0.1°C
Accuracy (With Full Bridge NDIS4102 (7 pins) Connector) [At full bridge strain measurement]
0 to ±30 k ×10-6 strain: ± (0.05% of reading +2) ×10-6 strain
±30 k to ±300 k ×10-6 strain: ± (0.1% of reading +20) ×10-6 strain

[When measuring temperature with civil engineering transducers with a thermal sensor]
±0.5°C
Check Functions Insulation resistance measurement: 2 M to 100 MΩ
Resistance measurement: 0 to 20 kΩ
Interval Measurement 1 min to 99 h 59 min in 1 min steps
Starting time: year/month/day/hour/minute
Storage SD card (Option)
Applicable Cards 256 MB, 512 MB, 1 GB, 2 GB (FAT16)
(SDHC and SDXC not supported)
Display Monochrome LCD, 128 × 64
TEDS Reads information from TEDS-installed sensors.

Channel name writing
(Kyowa ID only in up to 10 characters)
Operating Temperature -10 to 50ºC
Operating Humidity 20 to 85% (Non-condensing)
Power Supply 2 AA alkaline batteries
Consecutive Operation Time Approx. 10 h(With alkaline batteries)
*Nickel metal hydride batteries are also used.
*An AC adapter (Optional, SW-0522E) is provided for SME-31A/101A.
Auto Power Off Power is automatically turned off if no key operation is detected for 5 minutes.

In interval measuring mode with an interval of 3 minutes or longer, power is automatically turned off during standby period and turned on again 1 minute before the next measurement is started.
(ON/OFF of Auto Power Off is settable.)
Dimensions 188 W × 41 H x 108.4 D mm (Excluding protrusions)
Weight Approx. 450 g (Excluding batteries)
Compliance 2 AA alkaline batteries
Consecutive Operation Time Approx. 10 h(With alkaline batteries)
*Nickel metal hydride batteries are also used.
*An AC adapter (Optional, SW-0522E) is provided for SME-31A/101A.
Standard Accessories Input cable U-119
AA alkaline battery × 2
Shoulder belt
Hand strap
Instruction manual (CD-R)
Communication cable N-102
Optional Accessories AC adapter SW-0522E
Temperature measuring adapter for SME SMET-1A

SANTA TECHNOLOGY CO.,LTD. (Head Office)
35/218 Moo. 2, Leabkhlongsam Rd., Khlongsam, Khlongluang, Pathumthani 12120
Call 02-101-3454 ,089-006-2766
Fax 02-101-3453
Mail. santatech@gmail.com
Line : @santatech
Web : https://santatechnology.com/

สั่งวันนี้ ราคาพิเศษเฉพาะออนไลน์ คลิกเลย!

02-101-3453
Line: @santatech
santatech@gmail.com
ติดต่อสอบถาม คลิก
อีเมล์
โทรศัพท์
แชทผ่าน LINE
แชทผ่าน Facebook
ดูแผนที่

please wait.....