รายละเอียด
Memmert SF55 ตู้อบฆ่าเชื้อ
เครื่องนึ่งฆ่าเชื้อ SF55
เครื่องนึ่งฆ่าเชื้อแบบมาตรฐาน
คุณลักษณะด้านความปลอดภัยที่ขาดไม่ได้สำหรับเครื่องฆ่าเชื้อด้วยลมร้อนนี้: Setpoint Wait ซึ่งหมายความว่าโปรแกรมสำหรับการฆ่าเชื้อจะเริ่มต้นเมื่อถึงอุณหภูมิที่ตั้งไว้เท่านั้น คุณสมบัตินี้สามารถใช้กับเซ็นเซอร์อุณหภูมิ Pt100 ที่กำหนดตำแหน่งได้อย่างอิสระ ที่นี่เวลาในการฆ่าเชื้อจะเริ่มต้นก็ต่อเมื่อถึงอุณหภูมิที่ตั้งไว้ ณ จุดตรวจวัดทั้งหมดเท่านั้นและรับประกันการฆ่าเชื้อที่เชื่อถือได้ตลอดเวลา
ในหน้านี้คุณจะพบข้อมูลทางเทคนิคที่จำเป็นทั้งหมดเกี่ยวกับเครื่องฆ่าเชื้อด้วยลมร้อน Memmert ทีมงานลูกค้าสัมพันธ์ของเรายินดีที่จะช่วยเหลือหากคุณต้องการข้อมูลเพิ่มเติม หากคุณต้องการโซลูชันพิเศษที่กำหนดเอง
Temperature
Setting temperature range
|
+20 to +250 °C
|
Setting accuracy temperature
|
up to 99.9 °C: 0.1 / from 100 °C: 0.5
|
Working temperature range
|
at least 10 above ambient temperature to +250°C
|
Temperature sensor
|
1 Pt100 sensor DIN class A in 4-wire-circuit
|
Control technology
Language setting
|
German, English, Spanish, French, Polish, Czech, Hungarian
|
ControlCOCKPIT
|
SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
|
Timer
|
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
|
Function SetpointWAIT
|
the process time does not start until the set temperature is reached
|
Calibration
|
three freely selectable temperature values
|
adjustable parameters
|
temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime
|
Ventilation
Fan
|
forced air circulation by quiet air turbine, adjustable in 10 % steps
|
Fresh air
|
Admixture of pre-heated fresh air by electronically adjustable air flap
|
Vent
|
vent connection with restrictor flap
|
Communication
Documentation
|
programme stored in case of power failure
|
Programming
|
AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).
|
Safety
Temperature control
|
adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
|
Autodiagnostic system
|
for fault analysis
|
Standard equipment
Door
|
fully insulated stainless steel door with 2-point locking (compression door lock)
|
Internals
|
1 stainless steel grid(s), electropolished
|
Works calibration certificate
|
Calibration at +160°C
|
Stainless steel interior
Dimensions
|
w(A) x h(B) x d(C): 400 x 400 x 330 mm (d less 39 mm for fan)
|
Interior
|
easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
|
Volume
|
53 l
|
Max. number of internals
|
4
|
Max. loading of chamber
|
80 kg
|
Max. loading per internal
|
20 kg
|
Textured stainless steel casing
Dimensions
|
w(D) x h(E) x d(F): 585 x 784 x 514 mm (d +2x56mm door handle)
|
Housing
|
rear zinc-plated steel
|
Electrical data
Voltage Electrical load
|
230 V, 50/60 Hz
approx. 2000 W
|
Voltage Electrical load
|
115 V, 50/60 Hz
approx. 1700 W
|
Ambient conditions
Set Up
|
The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
|
Altitude of installation
|
max. 2,000 m above sea level
|
Ambient temperature
|
+5 °C to +40 °C
|
Humidity rh
|
max. 80 %, non-condensing
|
Overvoltage category
|
II
|
Pollution degree
|
2
|
Packing/shipping data
Transport information
|
The appliances must be transported upright
|
Customs tariff number
|
8419 8998
|
Country of origin
|
Federal Republic of Germany
|
WEEE-Reg.-No.
|
DE 66812464
|
Dimensions approx incl. carton
|
w x h x d: 730 x 950 x 670 mm
|
Net weight
|
approx. 57 kg
|
Gross weight carton
|
approx. 76 kg
|
บริษัท แซนต้า เทคโนโลยี จำกัด (สำนักงานใหญ่)
35/218 หมู่ 2 ถนนเลียบคลองสาม ตำบลคลองสาม อำเภอคลองหลวง จังหวัดปทุมธานี 12120
โทร 02-101-3454 ,089-006-2766
แฟกซ์ 02-101-3453
Mail. santatech@gmail.com
Line : @santatech
Web : https://santatechnology.com/