ตู้อบฆ่าเชื้อ Memmert SF750plus
Add to Wishlist1 in stock
ติดต่อขอใบเสนอราคา
ขอใบเสนอราคาช่องทางการสั่งซื้ออื่น ๆ
ติดต่อทาง Line @santatech ติดต่อทางอีเมล์ santatech@gmail.com ติดต่อทางโทรศัพท์ 02-1013454รายละเอียด
Memmert SF750plus ตู้อบฆ่าเชื้อ
เครื่องนึ่งฆ่าเชื้อ SF750plus
เครื่องนึ่งฆ่าเชื้อแบบมาตรฐาน
คุณลักษณะด้านความปลอดภัยที่ขาดไม่ได้สำหรับเครื่องฆ่าเชื้อด้วยลมร้อนนี้: Setpoint Wait ซึ่งหมายความว่าโปรแกรมสำหรับการฆ่าเชื้อจะเริ่มต้นเมื่อถึงอุณหภูมิที่ตั้งไว้เท่านั้น คุณสมบัตินี้สามารถใช้กับเซ็นเซอร์อุณหภูมิ Pt100 ที่กำหนดตำแหน่งได้อย่างอิสระ ที่นี่เวลาในการฆ่าเชื้อจะเริ่มต้นก็ต่อเมื่อถึงอุณหภูมิที่ตั้งไว้ ณ จุดตรวจวัดทั้งหมดเท่านั้นและรับประกันการฆ่าเชื้อที่เชื่อถือได้ตลอดเวลา
ในหน้านี้คุณจะพบข้อมูลทางเทคนิคที่จำเป็นทั้งหมดเกี่ยวกับเครื่องฆ่าเชื้อด้วยลมร้อน Memmert ทีมงานลูกค้าสัมพันธ์ของเรายินดีที่จะช่วยเหลือหากคุณต้องการข้อมูลเพิ่มเติม หากคุณต้องการโซลูชันพิเศษที่กำหนดเอง
Temperature
Setting temperature range | +20 to +250 °C |
---|---|
Setting accuracy temperature | up to 99.9 °C: 0.1 / from 100 °C: 0.5 |
Working temperature range | at least 10 above ambient temperature to +250°C |
Temperature sensor | 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error |
Control technology
ControlCOCKPIT | TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays. |
---|---|
Language setting | German, English, Spanish, French, Polish, Czech, Hungarian |
Timer | Digital backwards counter with target time setting, adjustable from 1 minute to 99 days |
Function HeatBALANCE | adapting the distribution of the heating performance of the upper and lower heating circuit from -50 % to +50 % |
Function SetpointWAIT | the process time does not start until the set temperature is reached |
Calibration | three freely selectable temperature values |
adjustable parameters | temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime |
Ventilation
Fan | forced air circulation by 2 quiet air turbines, adjustable in 10 % steps for each segment individually |
---|---|
Fresh air | Admixture of pre-heated fresh air by electronically adjustable air flap |
Vent | vent connection with restrictor flap |
Communication
Documentation | programme stored in case of power failure |
---|---|
Programming | AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port |
Safety
Temperature control | mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature |
---|---|
Temperature control | overtemperature monitor TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display |
AutoSAFETY | additionally integrated over- and undertemperature monitor "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature |
Autodiagnostic system | for fault analysis |
Alarm | visual and acoustic |
Standard equipment
Internals | 2 stainless steel grid(s), electropolished |
---|---|
Works calibration certificate | Calibration at +160°C |
Door | fully insulated stainless steel doors with 2-point locking (compression door lock), lockable |
บริษัท แซนต้า เทคโนโลยี จำกัด (สำนักงานใหญ่)
35/218 หมู่ 2 ถนนเลียบคลองสาม ตำบลคลองสาม อำเภอคลองหลวง จังหวัดปทุมธานี 12120
โทร 02-101-3454 ,089-006-2766
แฟกซ์ 02-101-3453
Mail. santatech@gmail.com
Line : @santatech
Web :https://santatechnology.com/