เครื่องวัดสายไฟเบอร์ออฟติก Fluke Fiber QuickMap

รายละเอียด

เครื่องตรวจซ่อมเครือข่ายไฟเบอร์ออปติกแบบมัลติโหมด ขนาดพกพา Fiber QuickMap

Multimode Fiber Distance and Fault Locator

• Works on multimode fiber, 50/125µm and 62.5/125 µm
• 850 nm output wavelength. Measure up to 4,921 feet (1,500 metres) of fiber in seconds
• Locate severe bends, high-loss splices, breaks and dirty connectors in multimode fiber
• Measure and locate high-loss splices
• Locate the end of a fiber
• Find potential sources of high bit error rates caused by reflectance from dirty or poor connections
• Detects live optical signals before it begins testing
• Quick set-up. Connect your fiber and press the Test button. No lengthy set-up necessary
• Find problems quickly. Six-second test time—no more blind troubleshooting that can waste hours
• Change the Index of Refraction (IOR) to improve fiber length accuracy
• Visible in dark areas. Backlighted display turns off automatically
• Removable SC adapter is easily cleaned
• Optional LC, ST and FT interchangeable adapters are available
• Long battery life, 1,500 tests (typical) from 2 AA alkaline batteries
• Rugged construction; vibration and drop tested to 1 meter
• 
  

Specifications

• Models
  Operating temperature with the battery	0ºC to 50ºC
  Non-operating temperature	-20ºC to 60ºC
  Operating relative humidity (without condensation)	95% (10ºC to 35ºC) 75% (35ºC to 40ºC) uncontrolled < 10ºC
  Vibration	Random, 5 Hz to 500 Hz, MIL-PRF-28800F CLASS 2
  Shock	1 meter drop test
  Altitude	3000m
  EMC	EN 61326-1: 2004
  Battery type	2 AA alkaline batteries (no battery charger)
  Battery life	1500 tests (typical)
  Laser safety	Class 1 CDRH Complies to EN 60825-2
  LCD type	Backlit black and white (segments)
  Index of refraction range	1.45 to 1.5 (factory default is 1.496)
  Auto turn off	Automatically turns off after 5 minutes if no keys are pressed. Backlight turns off first.
  Factory calibration interval	None
  Output wavelengths	850 nm ± 10 nm
  Laser classification	Class 1 CDRH Complies to EN 60825-2
  Dynamic range	>11 dB
  Maximum distance	1500 meters or 4921 feet
  Maximum number of incidents shown	9
  Distance accuracy (0 m to 1500 m or 0 ft to 4921 ft)	± (1 m + 0.1 % x length) for reflective incidents1 ± (3 m + 0.1 % x length) for non-reflective incidents2
  Testing speed	< 6 seconds typical
  Connector	Removable/cleanable SC adapter, UPC polish
  Fiber types tested	50/125 µm or 62.5/125 µm multimode
  Detection of reflective incidents3	-35 dB default threshold (User selectable: -20 dB to -45 dB in 5 dB increments)
  Reflectance accuracy4	± 4 dB
  Maximum reflectance measurement	-20 dB
  Detection of loss incidents5	0.70 dB default threshold (user-configurable from 0.5 dB to 6.1 dB in 0.2 dB increments)
  Bulkhead quality	If no fiber is attached or if the connector is dirty, the troubleshooter displays 0 m or 0 ft.
  Live fiber detection	Detects optical signals from 600 nm to 1050 nm and shows ACTIVE LINE if a signal is there. Looks for a signal every 3 seconds after the first detec-tion. +7 dB maximum input power.
  Certifications and compliance	Conforms to relevant European Union                 directives     Conforms to relevant Australian standards    Listed by the Canadian Standards Association CSA                C22.2 No. 61010.1.04    Conforms to FCC Rules, Part A, Class A

  1. ± user-configurable Index of Refraction (IOR) error ± the incident location error. Incident location error for reflective incidents: ±1 m from 1 m to 1.5 km.

  2. ± user-configurable Index of Refraction (IOR) error ± the incident location error. Incident location error for non-reflective incidents: ±2 m for lengths £15 m, otherwise ±1 m.

  3. Finds and gives the location of an incident that has a reflectance larger than -55 dB. Detects incidents >1m after the bulkhead connector when the bulkhead reflectance is <35 dB. Detects incidents >3 m after an incident when the incident reflectance is <35 dB.

  4. With a backscatter coefficient of -63 dB at 850 nm using a calibrated -14 dB reference.