ชุดเครื่องมือวัดเเสง Fluke SimpliFiber Pro Optical Power Meter and Fiber Test Kits

รายละเอียด

ชุดเครื่องมือวัดเเสง Fluke SimpliFiber Pro Optical Power Meter and Fiber Test Kits

Simple-to-use fiber-loss tester with advanced time-saving features. Choose from various kits with configurations to meet your fiber verification, inspection, and cleaning needs.

Single-port, simultaneous dual-wavelength feature completes testing in half the time and saves measurements from both wavelengths into one record

Additional wavelengths of 1490 and 1625 nm

CheckActive™ feature emits an audible tone and displays an icon when a live fiber is detected, eliminating the need to set up a measurement

FindFiber™ Remote ID enables one individual to quickly identify cable connections or routings (especially useful at patch panels), eliminating the need for multiple technicians on opposite ends of a fiber link to match color combinations

Min/Max capability automates precision tracking of intermittent power fluctuations

Large internal memory save 1000 results which enables continuous testing and recording

LinkWare Cable Test Management software helps to analyze test results and create professional test reports

Various kit configurations for all “first line” fiber handling needs, including fiber verification, inspection, and cleaning – all housed in a professional, rugged carrying case

Mag Kit Strap Attachment - Strong rare earth magnet attaches to metal surfaces in the testing environment, allowing the technician to work "hands free"

Specifications

Environmental Specifications
Operating Temperature	-10º C to 50º C
Storage Temperature	-20º C to 50º C
Operating Humidity	95% (10º C to 35º C) Non-Condensing 75% (35º C to 40º C) Non-Condensing Uncontrolled <10º C
EMI, RFI, EMC	Standards compliant1

1 Conforms to relevant European Union directives; Conforms to relevant Australian standards; Listed by the Canadian Standards Association; Complies with 21CFR.1040.10,11, and EN60825-1, 2:2007 (Class 1, Hazard Level 1)
 

Optical Power Meter
Detector Type	InGaAs
Calibrated Wavelengths	850 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625 nm
Measurement Range	+10 to -52 dBm (850 nm) +10 to -60 dBm (1300, 1310, 1490, 1550, 1625 nm)
Power Measurement Linearity	±0.2 dB (850 nm)1 ±0.1 dB (1300, 1310, 1490, 1550, 1625 nm)2
Power Measurement Uncertainty3	±0.25 dB
Display Resolution, dB or dBm	0.01 dB
Auto Dual-Wavelength Switching	Yes
Power Display Units	dBm, mW, μW
Auto-Wavelength Detection	Yes
Data Storage	1000 records, multiple wavelengths per record
External Interface	USB, 2.0 full speed
Optical Connector	Removable adapter, SC adapter as default, optional adapters include LC, ST
Display update rate	1 reading per second
Reference	Individually set for each wavelength
FindFiber ID detection	Yes
Power Requirement	2 AA Alkaline batteries
Battery Life4	> 50 Hours (typical)
Automatic Power Off	10, 20, 30 or 60 minutes (can be disabled by user)
Low Battery Warning	Yes, low battery icon blinks
Size (L x W x H)	6.4 in x 3.2 in x 1.5 in (16.5 cm x 8.0.cm x 3.9 cm)
Weight	11.5 oz (325 grams)

1 For 850nm, ±0.2 dB for power from 0 to -45 dBm, ±0.25 dB for power < -45 dBm
2 ±0.1dB for power from 0 to -55 dBm, ±0.2 dB for power > 0 dBm and < -55 dBm
3 23°C ±2°C, power level -20dBm, continuous wave, 62.5/125µm at multi mode wavelengths, 9/125 µm at 1310,1490, 1550 and 1625 nm; add 0.1 dB for 1625 nm,
4 For measured power levels 0 dBm or less, battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries.
 

Multimode Optical Source
Emitter Type	LED
Central Wavelength	850 nm, 1300 nm
Wavelength Accuracy	850 nm: +/-30 nm 1300 nm: +/- 20 nm
Spectral Width (FWHM)	850 nm: 50 nm (typical) 1300 nm: 135 nm (typical)
Minimum Output Power	850/1300 nm: ³  -20 dBm
Power Output Stability1	±0.1 dB over 8 hours
Auto Dual-Wavelength Switching	Yes. Can be enabled/disabled by user.
Optical Output Connector	Fixed SC
FindFiber Code Generation	Yes. Fixed at ID 1.
Modes	CW, 2 kHz modulated, Auto-wavelength
Power Requirement	2 AA Alkaline batteries.
Battery Life2	40 hrs (typical)
Automatic Power Off	30 minutes (can be disabled by user)
Low Battery Warning	Yes, LED blinks
Size (L x W x H)	5.6 in x 3.2 in x 1.6 in (14.2 cm x 8.1 cm x 4.1cm)
Weight	1.8 oz (278 g)

1 23° C ± 2° C, after 5 minutes warm-up time
2 In auto-wavelength mode, battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries.
 

Singlemode Optical Source
Emitter Type	1310 nm/1550 nm: dual FP laser 1490 nm/1625 nm: dual DFB laser
Central wavelength	1310 nm: ±20 nm 1550 nm: ±30 nm 1490 nm: ±3 nm 1625 nm: ±5 nm
Wavelength Accuracy	1310 nm: +/- 20 nm 1550 nm: +/- 30 nm
Spectral width (RMS)	1310 nm: 2 nm (maximum) 1550 nm: 3 nm (maximum) 1490 nm/1625 nm: 1 nm (maximum)
Minimum output power	1310/1550 nm ≥ -7dBm (typical) 1490 nm/1625 nm: ≥ -3 dBm (typical)
Power Output Stability1	±0.25 dB over 8 hours
Auto Dual-Wavelength Switching	Yes. Can be enabled or disabled by user.
Optical Connector	Fixed SC
Launch Condition	9/125 μm fiber
FindFiber Code Generation	1310/1550 source is fixed at ID 2 1490 nm/1625 nm is fixed at ID 3.
Modes	CW, 2 kHz modulated, Auto-wavelength
Power Requirement	2 AA Alkaline batteries
Battery Life2	30 hrs (typical)
Automatic Power Off	30 minutes (can be enabled or disabled by user)
Low Battery Warning	LED blinks.
Size (L x W x H)	5.6 in x 3.2 in x 1.6 in (14.2 cm x 8.1 cm x 4.1cm)
Weight	9.8 oz (278 grams)

1 23° C ± 2° C, after 5 minutes warm-up time
2 In auto-wavelength mode, battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries.
 

FindFiber Source Specifications
Emitter Type	Laser
Source Connector	Fixed SC
FindFiber Code Generation	1 through 8. Default is 3.
Power On/Low-battery Indicator	LED
Power Requirement	2 AA Alkaline batteries
Battery Life	> 80 Hours (typical)
Automatic Power Off	30 minutes
Low Battery Warning	LED blinks
Size (L x W x H)	7.1 in x 1.3 in x 1.0 in (17.9 cm x 3.2 cm x 2.5 cm)
Weight	4.4 oz (125 g)
Safety	Meets Class 1 CDRH