เครื่องวัดสายไฟเบอร์ออฟติก วิเคราะห์การเชื่อมต่อสายไฟเบอร์ Fluke Fiber OneShot PRO

รายละเอียด

เครื่องวัดสายไฟเบอร์ออฟติก วิเคราะห์การเชื่อมต่อสายไฟเบอร์ Fluke Fiber OneShot PRO

Fiber OneShot™ PRO

Single Mode Fiber Distance and Fault Locator

• Works on single mode fiber, 9/125µm
• 1550nm output wavelength. Compatible with standard PON wavelengths: 1310, 1490, 1550 and 1625nm
• Measure up to 75,459 feet (23,000 metres) of fiber in seconds
• Locate severe bends, high-loss splices, breaks and dirty connectors in singlemode fiber
• Measure and locate high loss connections and breaks
• Locate the end of a fiber
• Find potential sources of high bit error rates caused by reflectance from dirty or poor connections
• Detects live optical signals before it begins testing
• Quick set-up. Connect your fiber and press the Test button. No lengthy set-up necessary
• Find problems quickly. Six-second test time—no more blind troubleshooting that can waste hours
• Change the Index of Refraction (IOR) to improve fiber length accuracy
• Visible in dark areas. Backlighted display turns off automatically
• Removable SC adapter is easily cleaned
• Optional LC, ST and FT interchangeable adapters are available
• Long battery life, 1,500 tests (typical) from 2 AA alkaline batteries
• Rugged construction; vibration and drop tested to 1 meter
• Fluke 414D Distance Measuring Laser (เครื่องวัดระยะห่างเลเซอร์)
• Fluke 424D Distance Measuring Laser (เครื่องวัดระยะห่างเลเซอร์)
• 
  

• Specifications

  Specifications are typical.
  Dimensions	17.5 cm H 7.8 cm W 3.8 cm D .35 kg weight including batteries
  Operating temperature with the battery	0ºC to 50ºC
  Non-operating temperature	-20ºC to 60ºC
  Operating relative humidity (without condensation)	95% (10ºC to 35ºC) 75% (35ºC to 40ºC) uncontrolled < 10ºC
  Vibration	Random, 5 Hz to 500 Hz, MIL-PRF- 28800F CLASS 2
  Shock	1-metre drop test
  Altitude	9,842 feet/3000 metres
  EMC	EN 61326-1:2004
  Battery type	2 AA alkaline batteries (no battery charger)
  Battery life	More than 1500 tests (typical)
  Laser safety	Class 1 CDRH Complies to EN 60825-2
  LCD type	Backlit black and white (segments)
  Index of refraction range	1.45 to 1.5 (factory default is 1.468)
  Auto turnoff	Automatically turns off after 5 minutes if no keys are pressed. Backlight turns off first.
  Factory calibration interval	None
  Output wavelengths	1550nm ± 20nm at 25ºC
  Laser classification	Class 1 CDRH Complies to EN 60825-2
  Maximum distance	75,459 feet or more than 23,000 metres
  Maximum number of incidents shown	9
  Distance accuracy	± (1 m + 1% x length) for reflective incidents1  ± (3 m + 1% x length) for non-reflective incidents2
  Testing speed	5 seconds typical testing time
  Connector	Removable/cleanable SC adapter, UPC polish
  Fiber types tested	9/125μm singlemode
  Detection of reflective incidents3	-45 dB default threshold (user-selectable: -24 dB to -62 dB in 1 dB increments)
  Maximum reflectance measurement	-24 dB
  Detection of loss incidents4	1.5 dB default threshold
  Bulkhead quality	If no fiber is attached or if the connector is dirty, the troubleshooter displays 0 m or 0 ft.
  Live fiber detection	Detects optical signals from 1250nm to 1625nm and shows ACTIVE LINE if a signal is there. Looks for a signal every 3 seconds after the first detection. +7 dB maximum input power.
  	Conforms to relevant European Union directives
  	Conforms to relevant Australian standards
  	Listed by the Canadian Standards Association CSA C22.2 No. 61010.1.04
  	Conforms to FCC Rules, Part A, Class A

  1  ± user-configurable Index of Refraction (IOR) error ± the incident location error.

  2  ± user-configurable Index of Refraction (IOR) error ± the incident location error.

  3  Detects the location of an incident that has a reflectance larger than -62 dB. Detects incidents >2 m after the bulkhead connector when the bulkhead reflectance is <35 dB. Detects incidents >3 m after an incident when the incident reflectance is <35 dB.

  4  Detects incidents >10 m after the bulkhead connector or any prior incident when the bulkhead reflectance is <-35 dB and the reflectance of any prior incident is  <-35 dB. The maximum link loss prior to the incident is <7 dB.