Milliamp process clamp meter fluke 773

Description

Key feature

The 772 and 773 models expand the capabilities of the popular 771 mA clamp meter. And now it remains only to decide which model will save you the most time.

Fluke 771, 772 and 773 features:

• Best in class 0.2% accuracy
  
• Resolution and sensitivity 0.01 mA
  
• Measures 4 to 20 mA signals "without breaking the loop".
  
• Measure mA signals for PLC and I / O of analog control systems.
  
• Dual backlit displays with both mA measurement and percentage span of 4 to 20 mA.
  
• The measurement spotlight is very bright so wires can be seen in the dark.
  
• Detachable clamp with extension cable for tight measurement
  
• Measures 10 to 50 mA signals in older control systems, using a 99.9 mA range.
  
• Automatically changes 4 outputs to 20 mA for remote testing.
  
• Power saving features, which automatically switch off and put off the power, extend battery life.
  
• Hold display function records and displays changed measurements.
  

• Measure 4 to 20 mA signals with in-circuit measurement.
  
• Simultaneous measurement in mA circuit with 24V loop power for powering and testing the transmitter.
  
• Sends 4 to 20 mA signals for testing control system I / O or I / P.
  
• MA output linear slope or 25% step output
  
• Automatically changes 4 outputs to 20 mA for remote testing.
  

• DC voltage measurement to confirm the 24V power supply or voltage I / O signal.
  
• Supply DC voltage to test input devices that accept 1-5V or 0 to 10V signals.
  
• The scaled mA output will provide a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp.
  
• Enables the mA signal recorded to a separate recording device without breaking the loop.
  
• MA signal output allows recording DMM or other devices A 4- to 20 mA signal can be recorded without breaking the loop.
  
• MA In / Out: Measure mA signal simultaneously with clamp and source mA signal.
  
• Send the mA input signal to the device and measure the 4-20 mA output in devices such as a valve or mA extractor.
  
• Voltage output slope or 25% step output
  
• Automatically change voltage output for remote testing.
  

Santa Technology Company Limited (Headquarters)
35/218 Moo 2, Liab Klong Sam Road, Klong Sam Subdistrict, Khlong Luang District Pathumthani 12120
Call 02-101-3454, 089-006-2766
Fax 02-101-3453
Mail. santatech@gmail.com
Line: @santatech
Web: https://santatechnology.com/