Parallel plate viscometer model vr-5510 Ueshima
Parallel Plate ViscometerModel : VR-5510 This instrument measures flowability and spreadability of printing ink paint etc. and is used widely in the industry of inks. The sample is pressed by a glass...
SKU:
VR-5510
Availability:
Request for Quotation1 in Stock
Availability:
Request for Quotation1 in Stock
Uehisma cross cut exfoliation tester model AD-1110
Cross Cut Exfoliation Tester Model : AD-1110
SKU:
Ueshima AD-11
Availability:
Request for Quotation1 in Stock
Ueshima akron abrasion tester model ab-1500 series
Akron abrasion tester model ab-1500 series The Akron Abrasion Tester is one of the abrasion testers that have been widely used.The testing equipment is of the type that presses a grindstone to a disc...
SKU:
AB-1500 Serie
Availability:
Request for Quotation1 in Stock
Ueshima automatic adhesion tester model hd-4525
Automatic Adhesion Tester Model : HD-4525
SKU:
Ueshima HD-45
Availability:
Request for Quotation1 in Stock
Ueshima automatic cross cut exfoliation tester model ad-1120
Automatic Cross Cut Exfoliation Tester Model : AD-1120
SKU:
Ueshima AD-11
Availability:
Request for Quotation1 in Stock
Ueshima automatic dma model vr-7130
Automatic DMA Model : VR-7130 VR-7130 Automatic DMA was designed to eliminate possible causes of measurement errors and variability by adopting the full automatic system and the unique temperature sen...
SKU:
Ueshima VR-71
Availability:
Request for Quotation1 in Stock
Ueshima automatic press cutting machine model sc-3410
Automatic Press Cutting Machine Model : SC-3410 The Automatic Press Cutting Machine is used to cut(punch) the samples(e.g.Dumbbell shape sample) for tensile test and tearing test from 2mm slab sheet.6...
SKU:
Ueshima SC-34
Availability:
Request for Quotation1 in Stock
Ueshima automatic scratch adhesion tester model ad-2120
Automatic Scratch Adhesion Tester Model : AD-2120
SKU:
Ueshima AD-21
Availability:
Request for Quotation1 in Stock
Ueshima automatic test piece copying machine sc-2100 series
Automatic Test Piece Copying Machine Model : SC-2100 Series The Automatic Test Piece Copy (Cutting) Machine accurately and quickly cuts samples used in tensile and impact tests on hard plastics to spe...
SKU:
Ueshima SC-21
Availability:
Request for Quotation1 in Stock
Ueshima automatic williams plastometer vr-6100 series
Automatic Williams Plastometer Model : VR-6100 Series The Automatic Williams Plastometer is a testing equipment that measures plasticity with the height of a sample with time when the sample is putted...
SKU:
Ueshima VR-61
Availability:
Request for Quotation1 in Stock
Availability:
Request for Quotation1 in Stock
Ueshima belt flex tester ft-4100
Belt Flex TesterModel : FT-4100 Series The Belt Flexing Tester flexes a belt so that it goes along the roundness of a cylinder which is suspended with a specified load maintained. This can tests up to...
SKU:
Ueshima FT-41
Availability:
Request for Quotation1 in Stock
Availability:
Request for Quotation1 in Stock
Ueshima blow point analyzer bpa vr-9120
Blow Point Analyzer (BPA) Model : VR-9120 The Blow-Point Analyzer is a testing equipment to measure cure time of rubber the minimum required and effective to control curing process of tire belt and ru...
SKU:
Ueshima VR-91
Availability:
Request for Quotation1 in Stock
Ueshima cable abrasion tester ab-5100 series
Cable Abrasion Tester Model : AB-5100 Series The Cable Abrasion Tester is for cable insulation and is of the type that fixes a test piece in contact with abrasion tape loads it and moves the abrasion...
SKU:
AB-5100 Serie
Availability:
Request for Quotation1 in Stock
Ueshima ccd de mattia flex cracking tester ft-1515
CCD De Mattia Flex Cracking TesterModel : FT-1515 This equipment has a temperature chamber in which it applies repeated flexures on 20 test samples and captures images of cracks generated by the mecha...
SKU:
Ueshima FT-15
Availability:
Request for Quotation1 in Stock
Ueshima charpy impact tester im-1200 series
Charpy Impact Tester Model : IM-1200 Series The Charpy Impact Tester uses a supports a hard plastics test piece with or without a notch gives a rotary hammer to give an impact and destroy it measures...
SKU:
IM-1200 Serie
Availability:
Request for Quotation1 in Stock
Ueshima component chemical-resistance transmitter 7500 series
Component Chemical-Resistance Transmitter 7500 Series Feature 1. Ceramic diaphragm is installed. 2. All the wet parts are fluoropolymers made ( PTFE PFA) 3. Elution of metal (contamination) is minimiz...
SKU:
Component Che
Availability:
Request for Quotation1 in Stock
Ueshima compression tester cm-2100
Compression Set Tester Model : CM-2100 Series The Compression Set Tester is used to measure recovery rates of a cylindrical sample after putting a test piece between parallel platcs giving a specified...
SKU:
Ueshima CM-21
Availability:
Request for Quotation1 in Stock
Ueshima constant elongation fatigue tester ft-3100
Constant Elongation Fatigue Tester Model : FT-3100 Series The Constant Strain Fatigue Tester counts up the number of times of amplitudes with a specified stress or specified strain to a dumbbell or st...
SKU:
Ueshima-FT-31
Availability:
Request for Quotation1 in Stock
Ueshima constant stres-strain fatigue tester ft-3100
Constant Stress/Strain Fatigue Tester Model : FT-3100 Series The Constant Stress/Strain Fatigue Tester counts up the number of times of amplitudes with a specified stress or specified strain to a dumb...
SKU:
Ueshima FT-31
Availability:
Request for Quotation1 in Stock
Ueshima constant stress-strain flexometer ft-1200 series
Constant Stress/Strain Flexometer Model : FT-1200 Series The Constant Stress/Strain Flexometer measures the heating characteristics of a vulcanized rubber test piece when applied test amplitude the lo...
SKU:
Ueshima FT-12
Availability:
Request for Quotation1 in Stock
Ueshima cooling gas generator thermo jetter ulg-9000 series
Ueshima cooling gas generator thermo jetter ulg-9000 series THERMO JETTER ULG-9000 Series FEATURES No need of LN2. Just supply electric power and dry air to realize very low temperature! Even a small...
SKU:
Ueshima THERM
Availability:
Request for Quotation1 in Stock
Ueshima cratch adhesion tester model ad-2110
cratch Adhesion Tester Model : AD-2110
SKU:
Ueshima AD-2
Availability:
Request for Quotation1 in Stock
Ueshima curing mold md series
Curing Mold Model : MD Series Curing molds are used to make test pieces for various types of tests on vulcanized rubber specified in JIS and ISO. The accuracy of a mold is very important because it wi...
SKU:
Ueshima MD Se
Availability:
Request for Quotation1 in Stock
Ueshima digital ford cup viscometer model v-2550
Digital Ford Cup Viscometer Model : VR-2550
SKU:
Ueshima VR-25
Availability:
Request for Quotation1 in Stock
Ueshima din abrasion tester ab-6100
DIN Abrasion Tester Model : AB-6100 Series The DIN Abrasion Tester is of the type that rotates a drum with grinding cloth wound around the surface at a specified speed presses the sample against the g...
SKU:
Ueshima AB-61
Availability:
Request for Quotation1 in Stock
Ueshima disc fatigue tester ft-6100
Disc Fatigue Tester Model : FT-6100 The Disc Fatigue Tester gives repeated compressive deformation and tensile deformation fast in an alternating manner to a rubber test piece where a textile cord or...
SKU:
Ueshima FT-61
Availability:
Request for Quotation1 in Stock
Ueshima dupont impact tester im-4500 series
Dupont Impact Tester Model : IM-4500 Series The Dupont Impact Tester sandwiches a painted steel plate plastics sheet or other test piece between a spherical punch having a tip with a specified radius...
SKU:
Ueshima IM-4
Availability:
Request for Quotation1 in Stock