Ueshima akron abrasion tester model ab-1500 series
Akron abrasion tester model ab-1500 series The Akron Abrasion Tester is one of the abrasion testers that have been widely used.The testing equipment is of the type that presses a grindstone to a disc...
SKU:
AB-1500 Serie
Availability:
Request for Quotation1 in Stock
Ueshima automatic test piece copying machine sc-2100 series
Automatic Test Piece Copying Machine Model : SC-2100 Series The Automatic Test Piece Copy (Cutting) Machine accurately and quickly cuts samples used in tensile and impact tests on hard plastics to spe...
SKU:
Ueshima SC-21
Availability:
Request for Quotation1 in Stock
Ueshima automatic williams plastometer vr-6100 series
Automatic Williams Plastometer Model : VR-6100 Series The Automatic Williams Plastometer is a testing equipment that measures plasticity with the height of a sample with time when the sample is putted...
SKU:
Ueshima VR-61
Availability:
Request for Quotation1 in Stock
Ueshima belt flex tester ft-4100
Belt Flex TesterModel : FT-4100 Series The Belt Flexing Tester flexes a belt so that it goes along the roundness of a cylinder which is suspended with a specified load maintained. This can tests up to...
SKU:
Ueshima FT-41
Availability:
Request for Quotation1 in Stock
Ueshima blow point analyzer bpa vr-9120
Blow Point Analyzer (BPA) Model : VR-9120 The Blow-Point Analyzer is a testing equipment to measure cure time of rubber the minimum required and effective to control curing process of tire belt and ru...
SKU:
Ueshima VR-91
Availability:
Request for Quotation1 in Stock
Ueshima cable abrasion tester ab-5100 series
Cable Abrasion Tester Model : AB-5100 Series The Cable Abrasion Tester is for cable insulation and is of the type that fixes a test piece in contact with abrasion tape loads it and moves the abrasion...
SKU:
AB-5100 Serie
Availability:
Request for Quotation1 in Stock
Ueshima ccd de mattia flex cracking tester ft-1515
CCD De Mattia Flex Cracking TesterModel : FT-1515 This equipment has a temperature chamber in which it applies repeated flexures on 20 test samples and captures images of cracks generated by the mecha...
SKU:
Ueshima FT-15
Availability:
Request for Quotation1 in Stock
Ueshima charpy impact tester im-1200 series
Charpy Impact Tester Model : IM-1200 Series The Charpy Impact Tester uses a supports a hard plastics test piece with or without a notch gives a rotary hammer to give an impact and destroy it measures...
SKU:
IM-1200 Serie
Availability:
Request for Quotation1 in Stock
Ueshima compression tester cm-2100
Compression Set Tester Model : CM-2100 Series The Compression Set Tester is used to measure recovery rates of a cylindrical sample after putting a test piece between parallel platcs giving a specified...
SKU:
Ueshima CM-21
Availability:
Request for Quotation1 in Stock
Ueshima constant elongation fatigue tester ft-3100
Constant Elongation Fatigue Tester Model : FT-3100 Series The Constant Strain Fatigue Tester counts up the number of times of amplitudes with a specified stress or specified strain to a dumbbell or st...
SKU:
Ueshima-FT-31
Availability:
Request for Quotation1 in Stock
Ueshima constant stres-strain fatigue tester ft-3100
Constant Stress/Strain Fatigue Tester Model : FT-3100 Series The Constant Stress/Strain Fatigue Tester counts up the number of times of amplitudes with a specified stress or specified strain to a dumb...
SKU:
Ueshima FT-31
Availability:
Request for Quotation1 in Stock
Ueshima constant stress-strain flexometer ft-1200 series
Constant Stress/Strain Flexometer Model : FT-1200 Series The Constant Stress/Strain Flexometer measures the heating characteristics of a vulcanized rubber test piece when applied test amplitude the lo...
SKU:
Ueshima FT-12
Availability:
Request for Quotation1 in Stock
Ueshima curing mold md series
Curing Mold Model : MD Series Curing molds are used to make test pieces for various types of tests on vulcanized rubber specified in JIS and ISO. The accuracy of a mold is very important because it wi...
SKU:
Ueshima MD Se
Availability:
Request for Quotation1 in Stock
Ueshima din abrasion tester ab-6100
DIN Abrasion Tester Model : AB-6100 Series The DIN Abrasion Tester is of the type that rotates a drum with grinding cloth wound around the surface at a specified speed presses the sample against the g...
SKU:
Ueshima AB-61
Availability:
Request for Quotation1 in Stock
Ueshima disc fatigue tester ft-6100
Disc Fatigue Tester Model : FT-6100 The Disc Fatigue Tester gives repeated compressive deformation and tensile deformation fast in an alternating manner to a rubber test piece where a textile cord or...
SKU:
Ueshima FT-61
Availability:
Request for Quotation1 in Stock
Ueshima dupont impact tester im-4500 series
Dupont Impact Tester Model : IM-4500 Series The Dupont Impact Tester sandwiches a painted steel plate plastics sheet or other test piece between a spherical punch having a tip with a specified radius...
SKU:
Ueshima IM-4
Availability:
Request for Quotation1 in Stock
Ueshima durometer model hd-1110
Durometer Model : HD-1110(TypeA)/HD-1120(TypeD) The Durometer is the most spread type of tester for measuring the hardnesses of rubber plastics and other materials.A stop needle system and a variable...
SKU:
Ueshima HD-11
Availability:
Request for Quotation1 in Stock
Ueshima durometer stand hd-2110
Durometer Stand Model : HD-2110(TypeA)/HD-2120(TypeD) The Constant Loading Stand for Durometer is shuch that in measurement of the hardnesses of rubber and plastics this product is used with a spring...
SKU:
Ueshima HD-21
Availability:
Request for Quotation1 in Stock
Ueshima flat belt friction tester fr-5010 series
Flat Belt Friction Tester Model : FR-5010 Series The Flat Belt Friction Tester evaluates the friction characteristics of a test piece on a flat belt with a simulated road surface on the belt.The test...
SKU:
Ueshima FR-50
Availability:
Request for Quotation1 in Stock
Ueshima flat die rheometer fdr vr-3110 series
Flat Die Rheometer (FDR) Model : VR-3110 Series The FDR (Flat Die Rheometer)is a testing aquipment that measures changes in torque that vary with rubber by oscillation and determines the vulcanization...
SKU:
Ueshima VR-31
Availability:
Request for Quotation1 in Stock
Ueshima foam rubber repeated compression tester model cm-3010
Foam Rubber Repeated Compression Tester Model : CM-3010 The Foam Rubber Repeated Compression Tester gives repeated compressive strains having a specified amplitude to foamed rubber or sponge rubber th...
SKU:
Ueshima CM-30
Availability:
Request for Quotation1 in Stock
Ueshima fpc flex tester ft-2100 ft-2120
FPC Flex TesterModel : FT-2100 Series (FT-2120) Test Frequency:1-33Hz Test Temperature RT~100 Test Piece Flection Radius:R0.5~5mm Defection of Guidewire Malfunction:10 100 200 500
SKU:
Ueshima FT-21
Availability:
Request for Quotation1 in Stock
Ueshima fpc flex tester model ft-2100 series ft-2121
FPC Flex Tester Model : FT-2100 Series (FT-2121) The FPC Flexing Tester is a flex durability tester for flexible print circuit The flex speed(frequency) can be selected in a wide range between the low...
SKU:
Ueshima FT-21
Availability:
Request for Quotation1 in Stock
Ueshima fps abrasion tester model ab-2012
FPS Abrasion Tester Model : AB-2012 AB-2012 FPS Abrasion Tester can perform tests by controlling tangential force between the test piece and the abrasive whee in addition to the conventionalcontrol of...
SKU:
Ueshima AB-20
Availability:
Request for Quotation1 in Stock
Ueshima geers aging oven ag-1100 series
Geer’s Aging Oven Model : AG-1100 Series (TM-3525 TM-3526 TM-3527 TM-3528 TM-3532) The AG-1110 Series Geer Aging Oven evaluates the heat resistance of rubber in aging and degradation. This product exp...
SKU:
Ueshima AG-11
Availability:
Request for Quotation1 in Stock
Ueshima gehman torsion tester tm-2500 series
Gehman Torsion TesterModel : Model: TM-2500 Series The Gehman torsion tester measures the modulus of vulcanized rubber at low temperatures. The new model can measure up to six test pieces simultaneous...
SKU:
Ueshima TM-25
Availability:
Request for Quotation1 in Stock
Ueshima goodrich formula flexometer ft-1100 series
Goodrich式フレクソメーター(英語) Model : FT-1100 Series Model : FT-1100 Series The Goodrich Flexometer is a testing equipment long used in a wide range of areas and measures the heat build-up characteristics of...
SKU:
Ueshima FT-11
Availability:
Request for Quotation1 in Stock
Ueshima hdt-vspt tester tm-4100 series
HDT/VSPT TesterModel : TM-4100 Series The HDT/VICAT Tester evaluates the thermal resistance of molded plastics materials and examines both the heat deflection temperature(HDT)and VICAT softening tempe...
SKU:
Ueshima TM-41
Availability:
Request for Quotation1 in Stock
Ueshima inside drum friction tester fr-6010 series
Inside Drum Friction Tester Model : FR-6010 Series The Inside Drum Friction Tester evaluates the friction characteristics of a test piece on a road surface formed inside a rotating drum.The test piece...
SKU:
Ueshima FR-60
Availability:
Request for Quotation1 in Stock
Ueshima izod impact tester im-1100 series
Izod Impact Tester Model : IM-1100 Series The Izod Impact Tester uses a cantilever to support a hard plastics test piece with or without a notch gives a rotary hammer to give an impact and destroy it...
SKU:
UESHIMA IM-11
Availability:
Request for Quotation1 in Stock