เครื่องตัด อะมะดะ Amada turret punch presses-aent series

รายละเอียด

เครื่องตัด อะมะดะ Amada turret punch presses-aent series

AE NT Series                        AE 2510 NT                    AE 255 NT

Tonnage:               20 metric / 22 U.S.

Press Drive System:            Single motor AC servo drive

Maximum Stroke Length:        42 mm / 1.65˝

Maximum Thickness:        3.2 mm / 0.12˝ (standard brush table)6.4 mm / 0.25˝ (high density brush table - OPTIONAL

(see material, weight

restrictions below)

Travel Range (w/o reposition):        1270 mm x 2500 mm / 50˝ x 98.4˝        1270 mm x 1270 mm / 50˝ x 50˝

Maximum Feed Rate:        X axis: 80 m per min. / 3,150˝ per min. • Y axis: 60 m per min. / 2, 362˝ per min.

Maximum Weight of Material:            50 kg / 110 lbs. (F1 speed) • 150 kg / 331 lbs. (F4 speed)

Maximum Hit Rate:        X Axis 350 HPM • Y Axis 280 HPM (on 1˝ pitch at 0.118˝ stroke)        X Axis 370 HPM • Y Axis 275 HPM (on 1˝ pitch at 0.118˝ stroke)

                                            900 HPM (at 0.019˝ pitch and 0.055˝ stroke) for marking pattern    900 HPM (at 0.019˝ pitch and 0.055˝ stroke) for marking pattern

Punching Accuracy:            ± .1 mm / 0.004˝ and ± .07 mm / 0.002˝ (Fine Accuracy mode)

Turret Rotation Speed:        30 rpm

Auto-Index Rotation Speed:        60 rpm

NC Control:        AMNC/PC

Power Requirement:        19 kVA

Maximum Air Consumption:        750 NI/min. / 2.7 cubic feet

Mass of Machine:        13 metric tons / 28,660 lbs.12 metric tons / 26,400 lbs.