Wood Moisture Meter MT18

Description

Wood Moisture Meter MT-18

Measurement Instructions:
Remove the cover to expose the electrode pins.
Turn on the device.
Select the appropriate wood calibration scale A, B, C, D (refer to the wood calibration table in this manual) using the "WOOD" button.
Alternatively, press the "PAPER/WALL" button to select the paper or wall mode. Paper mode is used for testing cardboard/boxes, and wall mode is used for testing wall panels/stone panels/floors.
Insert the pins into the material and observe the reading.
Turn off the device.

Automatic Shutdown:
The device will automatically turn off if no buttons are pressed within 5 minutes. This design is intended to save battery power.

Specifications:
LCD display with backlight
Principle: Electrical resistance
Wood range: 4 ~ 75%
Paper range: 4 ~ 90%
Wall range: 0.2 ~ 24%
Resolution: 0.1%
Accuracy: ±0.5%
Electrode length: 10 mm (0.4")
Built-in electrode pins
Automatic shutdown: After approximately 5 minutes
Power supply: 2 x AAA batteries
Meter casing: ABS plastic
Operating temperature: 0 to 40°C (32 to 104°F)
Size: 145 x 67 x 32 mm (5.7" x 2.6" x 1.3")
Weight: 200g (7.0 oz)

Wood Species Calibration Table:
A: Teak, Walnut, Afrormosia, Rubber Tree, Imbuia, Kokrodua, Niove Bidinkala, Cork
B: Keruing, White Poplar, Beech, Cedar, Tola
C: Lauan, Ash, Elm, Fir, Maple, Diuk, Oak, Cherry
D: Basswood, Larch, Pine, Birch

Paper Mode:
Cardboard, Paper Box, Paper

Wall Mode:
Stone Panels, Wall Panels, Floors

E-Mail. santatech@gmail.com
Line : @santatech
Website :https://santatechnology.com/