Static shielding bag ssb m04-p-000 Korea

Description

Static shielding bag ssb m04-p-000 Korea

SSB is manufactured by depositing a thin metal coating, like aluminum over an antistatic polyester 

film substrate. This metalized layer protects the devices or the components in the bag from 

electrostatic fields.

According to the position of the metalized layer, there are two types of metalized shielding bags, 

"Metal-In" and "Metal-Out", in the market.

The metal-in bag or buried metal shielding bag is the most commonly used and recommended for 

packaging of static-sensitive components. It also tends to be superior to the metal-out bag in 

durability and cost

The metal-out shielding bag also protects the devices in the bag against static-induced damage. As 

the metal layer is closer to the outside surface, this bag has lower resistant reading than the 

metal-in bag, which can be important in some applications.

Our SSB is the metal-in type, which has the metalized layer inside.

Thickness:  55-200µm(Common:  75/JlTI)

Maximum width: 1,250mm

S/R: 1Oe9-10e11 ohm/sq