SIBATA Glass tube oven GTO-3000
Add to Wishlist
Instruction Manual & Key Specifications ■Rotary Heating Type ■Drying Type
Availability:
Out of stock
Contact for a quote.
Request for Quotationช่องทางการสั่งซื้ออื่น ๆ
ติดต่อทาง Line
@santatech
ติดต่อทางอีเมล์
santatech@gmail.com
ติดต่อทางโทรศัพท์
02-1013454
Description
| Analog output | 0 to 400mv (0 to 400 ° C) |
|---|---|
| Heater capacity | Approximately 800W |
| Temperature control range | Room temperature + 5-350 ° C |
| Safety function |
Heater disconnection warning, temperature sensor abnormality warning, over -temperature prevention function Rotating part abnormality warning (rotating heating type), upper and lower temperature abnormal warning |
| Timer function | On -amer, off -timer (99 hours 59 minutes 59 seconds each) |
| Rotation adjustment range | 0 to 60rpm (stepping motor) |
| Outer diameter of Center joint | About 10mm (diameter) |
| Sample bulb | 30ml (φ60mm) |
| Temperature sensor | Platinum measurement temperature resistor 3 wires 100Ω |
| Temperature control method | PID control |
| Allihn condenser | φ40mm x 3 |
| Mass | About 16kg |
| display | LCD display with backlight (20 digits x 4 lines) |
| Program function | 9 steps (1 step: 99 hours 59 minutes 59 seconds) x 9 patterns can be registered |
| Reaching vacuum degree | 1.3HPA (at 10rpm) |
| Operating Environment | 5-35 ° C |
| Power Supply | AC100 to 240V 50/60Hz 800VA |
| Size | 680 (W) x 250 (D) x 390 (H) mm |
