Motorized crimp tester imada mx-110

Description

Motorized crimp tester imada mx-110 

Crimp Tester – Motorized with Output 

• Force controlled non-destructive testing (destructive testing as well)
  

• Maintain force between high/low setpoints
  

• Increase force to high setpoint and stop
  

• Combination of screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range.
  

• Wide speed range: 0.4 – 11.5 in/min (optional speed ranges available)
  

• No programming required
  

• Newton, lbf and kgf units are selectable
  

• Accuracy: ±0.2% F.S. ±1 LSD
  

• USB, RS-232C, Digimatic and analog outputs
  

    Motorized wire crimp pull testers are designed to check the pull-off force values of electrical leads, crimped terminals and connectors and ensure consistent results by controlling force and speed. The system is configured with a motorized test stand and Imada DST or ZT series force gauge in the range of your choice and attachments. The cam grip or vise chuck are frequently used on the bottom of the tester. The WG-1, WG-2, WG-3 or KC-100 grip can be used on the top of the tester to suit your application. Data acquisition software is available as well as attachments for other applications. 

Santa Technology Company Limited (Headquarters)
35/218 Moo 2, Liab Klong Sam Road, Klong Sam Subdistrict, Khlong Luang District Pathumthani 12120
Call 02-101-3454, 089-006-2766
Fax 02-101-3453
Mail. santatech@gmail.com
Line: @santatech
Web: https://santatechnology.com/