เครื่องตรวจเช็คคุณภาพสายเคเบิ้ล Fluke CableIQ Qualification Tester
Copper qualification tester troubleshoots and qualifies Ethernet network cabling speed (10/100/1000/VoIP). Works on live networks to provide Ethernet switch detection and device configuration Measure network capacity (10 Meg 100 Meg 1 Gig) to determ
เจ้าหน้าที่จะติดต่อกลับพร้อมใบเสนอราคาภายใน 24 ชม.
รายละเอียดสินค้า
เครื่องตรวจเช็คคุณภาพสายเคเบิ้ล Fluke CableIQ Qualification Tester
Copper qualification tester troubleshoots and qualifies Ethernet network cabling speed (10/100/1000/VoIP).
- Works on live networks to provide Ethernet switch detection and device configuration
- Measure network capacity (10 Meg, 100 Meg, 1 Gig) to determine support for VoIP, data and video
- Advanced troubleshooting diagnostics; insertion loss, cross talk, noise issues
- Core troubleshooting features; length, distance to fault, graphical wire mapping, opens, shorts, power over Ethernet (POE) detection
- Tests all copper cabling media: twisted-pair, coax, and audio
- Locate and trace cables with digital toning technology. Requires IntelliTone 200 Digital Probe (included with CIQ-KIT)
- Qualifies and troubleshoots Industrial Ethernet cabling
Specifications
Cable types supported
UTP, STP, FTP, SSTP, RG6, RG59, audio and security
Qualification autotests
1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax
Supported tests
Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection.
Wiremap
Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs.
Find fault
Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application
Results storage
Up to 250 qualification test results
Power
Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries
Battery life
20 hours of typical use, without backlight
Other battery types supported
4AA photo lithium, NIHM, NICAD
Dimensions and weight
7in x 3.5in x 1.75in (17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg)
-
|
Cable types supported |
UTP, STP, FTP, SSTP, RG6, RG59, audio and security |
|
Qualification autotests |
1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax |
|
Supported tests |
Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection. |
|
Wiremap |
Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs. |
|
Find fault |
Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application |
|
Results storage |
Up to 250 qualification test results |
|
Power |
Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries |
|
Battery life |
20 hours of typical use, without backlight |
|
Other battery types supported |
4AA photo lithium, NIHM, NICAD |
|
Dimensions and weight |
7in x 3.5in x 1.75in (17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg) |
