Memmert UF75
Memmert UF75 The universally applicable lab oven U is Memmert’s classic appliance for temperature control in science research and material tests in industry. The technologically perfected masterpiece made of high-quality hygienic easy
Our team will contact you with a quotation within 24 hours.
Product details
Memmert UF75
Stainless steel interior
- Interior: easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
- Volume: 74 l
- Dimensions: w(A) x h(B) x d(C): 400 x 560 x 330 mm
- Max. number of internals: 6
- Max. loading of chamber: 120 kg
- Max. loading per internal: 20 kg
Textured stainless steel casing
- Dimensions: w(D) x h(E) x d(F): 585 x 944 x 514 mm
- Housing: rear zinc-plated steel
Electrical data
- Voltage Electrical load: 230 V, 50/60 Hz approx. 2500 W
- Voltage Electrical load: 115 V, 50/60 Hz approx. 1800 W
Ambient conditions
- Set Up: The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
- Altitude of installation: max. 2,000 m above sea level
- Ambient temperature: +5 °C to +40 °C
- Humidity rh: max. 80 %, non-condensing
- Overvoltage category: II
- Pollution degree: 2
Packing/shipping data
- Transport information: The appliances must be transported upright
- Customs tariff number: 8419 8998
- Country of origin: Federal Republic of Germany
- WEEE-Reg.-No. : DE 66812464
- Dimensions approx incl. carton: w x h x d: 730 x 1130 x 670 cm
- Net weight: approx. 66 kg
- Gross weight carton: approx. 85 kg
Temperature
- Set temperature range in °C: min.10 above ambient up to +300
- Temperature: 1 Pt100 sensor DIN class A in 4-wire-circuit
Control technology
- Language setting: German, English, Spanish, French, Polish, Czech, Hungarian
- ControlCOCKPIT: SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
- Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
- Function SetpointWAIT: the process time does not start until the set temperature is reached
- Calibration: three freely selectable temperature values
- adjustable parameters: temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime
Ventilation
- Fan: forced air circulation by quiet air turbine, adjustable in 10 % steps
- Fresh air admixture: adjustment of pre-heated fresh air admixture by air flap control in 10 % steps
- Vent: vent connection with restrictor flap
Communication
- Documentation: programme stored in case of power failure
- Programming: AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).
Safety
- Temperature control: adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
- Autodiagnostic system: for fault analysis
Standard equipment
- Door: fully insulated stainless steel door with 2-point locking (compression door lock)
- Internals: 2 stainless steel grid(s), electropolished
- Works calibration certificate: Calibration at +160°C
Santa Technology Company Limited (Headquarters)
35/218 Moo 2, Liab Klong Sam Road, Klong Sam Subdistrict, Khlong Luang District Pathumthani 12120
Call 02-101-3454, 089-006-2766
Fax 02-101-3453
Mail. [email protected]
Line: @santatech
Web:
