Amada miyachi welding power supplies is800a is1400a

Amada miyachi welding power supplies is800a is1400a

Model:IS-800AIS-1400A

Power requirements:・Three phase, 380-480VAC (50/60Hz)10%・Three phase, 380-480VAC (50/60Hz)10%

                        ・Three phase, 200-240VAC (50/60Hz)10%・Three phase, 200-240VAC (50/60Hz)10%

Maximum output current:800A (3%)1400A (3%)

Number of schedules:255

Output frequency:600Hz～3kHz

Control method:Primary current RMS/ Secondary current RMS/ Secondary power RMS/ Primary current PEAK/ Secondary voltage RMS/ Constant phase

Timer setting:msec mode cyc mode

SQUEEZE DELAY0000～9999ms 000～999cyc

SQUEEZE0000～9999ms 000～999cyc

UP SLOPE 1,2,3000～999ms 00～50cyc

WELD 1,2,3000～999ms 00～50cyc

DOWN SLOPE 1,2,3000～999ms 00～50cyc

COOL 1,2000～999ms 00～99cyc

HOLD00000～20000ms 000～999cyc

OFF0 or 0010～9990ms 00～99cyc

Transformer turn ratio:1.0～199.9

Pulsation setting:01～19

Valve setting:2

Setting range:

(1)Constant current (2)Constant power (3)Constant voltage (4)Constant phase

(1)0.05～40.0kA (2)0.05～60.0kW(1)0.05～80.0kA (2)0.05～120.0kW

(3)0.20～9.99V (4)10.0～99.9%(3)0.20～9.99V (4)10.0～99.9%

Current monitor:HIGH 0.00～9.99kA / LOW 0.00～9.99kAHIGH 00.0～99.9kA / LOW 00.0～99.9kA

Power monitor:HIGH 0.00～9.99kW / LOW 0.00～9.99kWHIGH 00.0～99.9kW / LOW 00.0～99.9kW

Voltage monitor:HIGH 0.00～9.99V / LOW 0.00～9.99V

Pulse width monitor:10～100%

Installation environment:Ambient temp.5 - 40℃

Max. humidity90% (No condensation)

Max. altitude1000m or below

Mass38kg60kg