Amada fiber laser welder multi mode ml-6000 series

Amada fiber laser welder multi mode ml-6000 series

ModelML-6810C

Maximum power1000W

ModeMulti mode

Pulse widthREPEATStandard:0.1～500.0ms (0.1ms step)

Setting switching:0.05～500.00ms(0.05ms steps)

CWStandard:0.1～1000.0s (0.1s step)

Setting swichging:0.001～10.000s (0.001s step), 0.01～100.00s (0.01s step), 1～10000s(1s step)

Repeated number of pulse / modulation1～1000pps

Modulation function1～5000Hz (rectangular wave, triangular wave, sinusoidal wave)

Oscillation wavelengthFundamental wavelength

Positioning guide beamBuiltin visible larser (red)

Output stability±2%less (Ambient temperature change+/-5℃ in the range), (Water temperature:21to25℃), (Cooling water flow rate18 to 20 L/min), (Irradiation time 8 hrs in the range)

Fiber optic deliverySingle fiber delivery / 2 timesharing

Number of schedule256

Measurement functionLaser energy (J), Average power (W)

CounterDisplays the total number of outputs (9 digits), Displays the total number of acceptable outputs (9 digits)

Displays the total LD ON time (7 digits), Displays the laser output time (7 digits)

Length of the laser controller cable1m (standard) *Extension is opition

Laser controller and languageTouch panel, Removal (Japanese and English are available)

Power supply / Beaker rated current3-phase, 200-240V AC 50/60Hz / 40A

Power consumptionMaximum:4.0kW / Standby 1.0kW less

Cooling methodWater cooling (21 to 25℃)

Ambient temperature / Ambient humidity5 to 40℃ / 20 to 85%RH（non-condensing）

*1: When the laser power supply cooling water is constant, eight hours

*2: Depends on the branch

*Specifications subject to change without notice.