Amada fiber laser welder 1000w single mode

Amada fiber laser welder 1000w single mode

ModelMF-C1000A-S

Maximum power1000W

Oscillation modeSingle mode

Pulse widthREPEATStandard:0.1～500.0ms (0.1ms steps)

Setting switching:0.05～500.00ms (0.05ms steps)

CWStandard:0.1～1000.0s (0.1s steps)

Setting swichging:0.001～10.000s (0.001s steps), 0.01～100.00s (0.01s steps),

1～10000s(1s steps)

Repeated number of pulse / modulation1～1000pps

Modulation function1～5000Hz (rectangular wave, triangular wave, sinusoidal wave)

Oscillation wavelengthFundamental wavelength

Positioning guide beamBuiltin visible larser (red)

Output stability±2%less (Ambient temperature change+/-5℃ in the range), (Water temperature:21to25℃), (Cooling water flow rate18 to 20 L/min), (Irradiation time 8 hrs in the range)

Number of schedule256

Measurement functionLaser energy (J), Average power (W)

CounterDisplays the total number of outputs (9 digits), Displays the total number of acceptable outputs (9 digits)

Displays the total LD ON time (7 digits), Displays the laser output time (7 digits)

Length of the laser controller cable1m (standard) *Extension is opition

Laser controller and languageTouch panel, Removal (Japanese and English are available)

Power supply / Beaker rated current3-phase, 200-240V AC 50/60Hz / 40A

Power consumptionMaximum:3.9kW / Standby 1.0kW less

Cooling methodWater cooling (21 to 25℃)

Ambient temperature / Ambient humidity5 to 40℃ / 20 to 85%RH（non-condensing）

*1: When the laser power supply cooling water is constant, eight hours

*2: Depends on the branch

*Specifications subject to change without notice.