ตู้อบลมร้อน Memmert UN750

SKU: MM UN750
Memmert UN750 ตู้อบลมร้อน ตู้อบอเนกประสงค์ UN750 การอบแห้งความร้อนการชะลอวัยการเผาในและการชุบแข็งอย่างแม่นยำในการวิจัยวิทยาศาสตร์อุตสาหกรรมและการประกันคุณภาพ
Availability:

1 in stock

ติดต่อขอใบเสนอราคา

ขอใบเสนอราคา

รายละเอียด

Memmert UN750 ตู้อบลมร้อน

ตู้อบอเนกประสงค์ UN750
การจัดส่งแบบมาตรฐาน Universal Oven
เตาอบในห้องปฏิบัติการ U ที่ใช้งานได้ทั่วไปเป็นอุปกรณ์คลาสสิกของ Memmert สำหรับการควบคุมอุณหภูมิในด้านวิทยาศาสตร์การวิจัยและการทดสอบวัสดุในอุตสาหกรรม ผลงานชิ้นเอกที่สมบูรณ์แบบทางเทคโนโลยีที่ทำจากสแตนเลสสตีลคุณภาพสูงถูกสุขอนามัยทำความสะอาดง่ายไม่เป็นที่ต้องการในแง่ของเทคโนโลยีการระบายอากาศและการควบคุมการป้องกันอุณหภูมิที่สูงเกินไปและเทคโนโลยีการทำความร้อนที่ปรับแต่งอย่างแม่นยำ

ในหน้านี้คุณจะพบข้อมูลทางเทคนิคที่จำเป็นทั้งหมดเกี่ยวกับเตาอบในห้องปฏิบัติการ Memmert สากล ทีมงานลูกค้าสัมพันธ์ของเรายินดีที่จะช่วยเหลือหากคุณต้องการข้อมูลเพิ่มเติม หากคุณต้องการโซลูชันพิเศษที่กำหนดเอง

Temperature

Working temperature range at least 5 (UN/UNplus/UNm/UNmplus) or 10 (UF/UFplus/UFm/UFmplus) above ambient temperature to +300 °C
Setting accuracy temperature up to 99.9 °C: 0.1 / from 100 °C: 0.5
Setting temperature range +20 to +300°C
Temperature sensor 1 Pt100 sensor DIN class A in 4-wire-circuit

Control technology

Language setting German, English, Spanish, French, Polish, Czech, Hungarian
ControlCOCKPIT SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT the process time does not start until the set temperature is reached
Calibration three freely selectable temperature values
adjustable parameters temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime

Ventilation

Convection natural convection
Fresh air Admixture of pre-heated fresh air by electronically adjustable air flap
Vent vent connection with restrictor flap

Communication

Documentation programme stored in case of power failure
Programming AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).

Safety

Temperature control adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
Autodiagnostic system for fault analysis

Standard equipment

Internals 2 stainless steel grid(s), electropolished
Works calibration certificate Calibration at +160°C
Door fully insulated stainless steel doors with 2-point locking (compression door lock)

Stainless steel interior

Interior easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Volume 749 l
Dimensions w(A) x h(B) x d(C): 1040 x 1200 x 600 mm
Max. number of internals 14
Max. loading of chamber 300 kg
Max. loading per internal 30 kg

Textured stainless steel casing

Dimensions w(D) x h(E) x d(F): 1224 x 1720 x 784 mm (d +56mm door handle)
Installation on lockable castors
Housing rear zinc-plated steel

Electrical data

Voltage Electrical load 400 V, 3 phases, 50 Hz approx. 7000 W

Ambient conditions

Set Up The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
Altitude of installation max. 2,000 m above sea level
Ambient temperature +5 °C to +40 °C
Humidity rh max. 80 %, non-condensing
Overvoltage category II
Pollution degree 2

Packing/shipping data

Transport information The appliances must be transported upright
Customs tariff number 8419 8998
Country of origin Federal Republic of Germany
WEEE-Reg.-No. DE 66812464
Dimensions approx incl. carton w x h x d: 1330 x 1910 x 1050 mm
Net weight approx. 217 kg
Gross weight carton approx. 288 kg

บริษัท แซนต้า เทคโนโลยี จำกัด (สำนักงานใหญ่)
35/218 หมู่ 2 ถนนเลียบคลองสาม ตำบลคลองสาม อำเภอคลองหลวง จังหวัดปทุมธานี 12120
โทร 02-101-3454 ,089-006-2766
แฟกซ์ 02-101-3453
Mail. santatech@gmail.com
Line : @santatech
Web : https://santatechnology.com/

ติดต่อสอบถาม คลิก
อีเมล์
โทรศัพท์
แชทผ่าน LINE
แชทผ่าน Facebook
ดูแผนที่

please wait.....