รายละเอียด
Memmert SN160plus ตู้อบฆ่าเชื้อ
ตู้อบฆ่าเชื้อ SN160plus
เครื่องนึ่งฆ่าเชื้อแบบมาตรฐาน
คุณลักษณะด้านความปลอดภัยที่ขาดไม่ได้สำหรับเครื่องฆ่าเชื้อด้วยลมร้อนนี้: Setpoint Wait ซึ่งหมายความว่าโปรแกรมสำหรับการฆ่าเชื้อจะเริ่มต้นเมื่อถึงอุณหภูมิที่ตั้งไว้เท่านั้น คุณสมบัตินี้สามารถใช้กับเซ็นเซอร์อุณหภูมิ Pt100 ที่กำหนดตำแหน่งได้อย่างอิสระ ที่นี่เวลาในการฆ่าเชื้อจะเริ่มต้นก็ต่อเมื่อถึงอุณหภูมิที่ตั้งไว้ ณ จุดตรวจวัดทั้งหมดเท่านั้นและรับประกันการฆ่าเชื้อที่เชื่อถือได้ตลอดเวลา
ในหน้านี้คุณจะพบข้อมูลทางเทคนิคที่จำเป็นทั้งหมดเกี่ยวกับเครื่องฆ่าเชื้อด้วยลมร้อน Memmert ทีมงานลูกค้าสัมพันธ์ของเรายินดีที่จะช่วยเหลือหากคุณต้องการข้อมูลเพิ่มเติม หากคุณต้องการโซลูชันพิเศษที่กำหนดเอง
Temperature
Setting temperature range
|
+20 to +250 °C
|
Setting accuracy temperature
|
up to 99.9 °C: 0.1 / from 100 °C: 0.5
|
Working temperature range
|
at least 5 above ambient temperature to +250 °C
|
Temperature sensor
|
2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
|
Control technology
ControlCOCKPIT
|
TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
|
Language setting
|
German, English, Spanish, French, Polish, Czech, Hungarian
|
Timer
|
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
|
Function HeatBALANCE
|
adapting the distribution of the heating performance of the upper and lower heating circuit from -50 % to +50 %
|
Function SetpointWAIT
|
the process time does not start until the set temperature is reached
|
Calibration
|
three freely selectable temperature values
|
adjustable parameters
|
temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime
|
Ventilation
Convection
|
natural convection
|
Fresh air
|
Admixture of pre-heated fresh air by electronically adjustable air flap
|
Vent
|
vent connection with restrictor flap
|
Communication
Documentation
|
programme stored in case of power failure
|
Programming
|
AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
|
Safety
Temperature control
|
mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
|
Temperature control
|
overtemperature monitor TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display
|
AutoSAFETY
|
additionally integrated over- and undertemperature monitor "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature
|
Autodiagnostic system
|
for fault analysis
|
Alarm
|
visual and acoustic
|
Standard equipment
Door
|
fully insulated stainless steel door with 2-point locking (compression door lock)
|
Internals
|
2 stainless steel grid(s), electropolished
|
Works calibration certificate
|
Calibration at +160°C
|
Stainless steel interior
Interior
|
easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
|
Volume
|
161 l
|
Dimensions
|
w(A) x h(B) x d(C): 560 x 720 x 400 mm
|
Max. number of internals
|
8
|
Max. loading of chamber
|
210 kg
|
Max. loading per internal
|
20 kg
|
Textured stainless steel casing
Dimensions
|
w(D) x h(E) x d(F): 745 x 1104 x 584 mm (d +2x56mm door handle)
|
Housing
|
rear zinc-plated steel
|
Electrical data
Voltage Electrical load
|
230 V, 50/60 Hz
approx. 3200 W
|
Voltage Electrical load
|
115 V, 50/60 Hz
approx. 1800 W
|
Ambient conditions
Set Up
|
The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
|
Altitude of installation
|
max. 2,000 m above sea level
|
Ambient temperature
|
+5 °C to +40 °C
|
Humidity rh
|
max. 80 %, non-condensing
|
Overvoltage category
|
II
|
Pollution degree
|
2
|
Packing/shipping data
Transport information
|
The appliances must be transported upright
|
Customs tariff number
|
8419 8998
|
Country of origin
|
Federal Republic of Germany
|
WEEE-Reg.-No.
|
DE 66812464
|
Dimensions approx incl. carton
|
w x h x d: 830 x 1300 x 800 mm
|
Net weight
|
approx. 96 kg
|
Gross weight carton
|
approx. 122 kg
|
บริษัท แซนต้า เทคโนโลยี จำกัด (สำนักงานใหญ่)
35/218 หมู่ 2 ถนนเลียบคลองสาม ตำบลคลองสาม อำเภอคลองหลวง จังหวัดปทุมธานี 12120
โทร 02-101-3454 ,089-006-2766
แฟกซ์ 02-101-3453
Mail. santatech@gmail.com
Line : @santatech
Web :https://santatechnology.com/